3M LM1 User Manual - page 13
11
(English)
EN
Changing Temperature or pH Recording for a Test Point within a Sample Plan
1. To select the Test Point you want to retest if you are still in the same Sample Plan, tap Next or Previous .
2. To use a different Sample Plan, tap Home
, then tap the Sample Plan, then tap the date and time of the run.
3. Tap Scroll down
or Scroll up
then tap the Test Point you want to retest.
4. Use the number pad to enter the Temperature test result or pH test result.
• The test result appears and is stored in the memory so it can be synchronized with the 3M Clean-Trace Hygiene
Management Software. The result is also interpreted using your established pass/fail limits and is displayed on the
screen as
PASS
,
CAUTION or FAIL .
• To add a comment to the result, tap the Add Comment
symbol. Any previously-selected comments appear.
• Tap
[Add Comments].
• Tap the comment. Tap
[OK]. Tap [Back].
Moving to a Different Test Point in the Same Sample Plan
1. To move to the next Test Point in a Sample Plan, tap Next . The name of the next Test Point in the Sample Plan
displays. Tap Next again to move to the following Test Point in the Sample Plan until you reach the last Test Point in
the Sample Plan.
2. To move to a previous Test Point in a Sample Plan, tap Previous . The name of the previous Test Point in the Sample
Plan displays. Tap Previous again to move to the preceding Test Point in the Sample Plan until you reach the first Test
Point in the Sample Plan.
3. When the Test Point you want is displayed, follow the instructions in this manual for Performing an ATP Test on a Test
Point within a Sample Plan, starting with step 5.
Moving to a Different Test Point in a Different Sample Plan
1. Tap Home
to move to the Sample Plan screen.
2. To do an ATP test on a Test Point in a Sample Plan you already started, tap the Sample Plan with the starting date and
time you want. If that Sample Plan does not appear, tap scroll up
or scroll down
or swipe the list up or down to
display additional Sample Plans.
3. To move to the next Test Point in a Sample Plan, tap Next . The name of the next Test Point in the Sample Plan
displays. Tap Next again to move to the following Test Point in the Sample Plan until you reach the last Test Point in
the Sample Plan.
4. To move to a previous Test Point in a Sample Plan, tap Previous . The name of the previous Test Point in the Sample
Plan displays. Tap Previous again to move to the preceding Test Point in the Sample Plan until you reach the first Test
Point in the Sample Plan.
5. When the Test Point you want is displayed, follow the instructions in this manual for Performing an ATP Test on a Test
Point within a Sample Plan, starting with step 5.
Viewing Test Results
1. To move to the Sample Plan screen, tap Results
.
2. To display results with a fail Test Status, tap
[Failed Tests]. To display the most recent results, tap [Last Test]. To display
results for the selected Sample Plan, tap
[Sample Plan].
3. Test results are displayed using color coding: red for fail test results, yellow for caution test results and green for pass
test results. The display also includes the Sample Plan name, the Test Point name, the date and time of the test, and the
name of the person who did the testing.
4. To display additional test results, tap Scroll down
or Scroll up
. You can also scroll up and down using a swiping
motion on the touch screen.