3M LM1 User Manual - page 3
1
(English)
EN
INTENDED USE
The 3M Clean-Trace Luminometer is a battery operated Luminometer utilized primarily for objective and sensitive
determination of the end result of Adenosine Tri-Phosphate (ATP) tests. The 3M Clean-Trace Luminometer power supply
is provided to charge the battery. The 3M™ Clean-Trace™ Hygiene Management Software is designed for the transfer,
organization, and storage of data generated from the 3M™ Clean-Trace™ ATP Tests.
3M has not designed nor documented the 3M Clean-Trace Luminometer, and its power supply, or 3M Clean-Trace
Hygiene Management Software for use with other manufacturers’ products, use with other manufacturers’ designs, or use
in any other application that has not been evaluated or documented by 3M and may lead to an unsafe condition. The 3M
Clean-Trace Luminometer is not intended to be used in potentially flammable or explosive environments. Although the 3M
Clean-Trace Hygiene Monitoring and Management System is very sensitive, surfaces or solutions should not be considered
sterile based on results. The 3M Clean-Trace Hygiene Monitoring and Management System is not intended to be used in the
diagnosis of conditions in humans or animals. The user is responsible to know and follow applicable workplace regulations.
3M anticipates that the 3M Clean-Trace ATP Tests, equipment, and software will be utilized by technicians that have been
properly trained on the 3M Clean-Trace ATP Test methods.
If this product is used in a manner not specified, the protection provided by the product may be impaired.
USER RESPONSIBILITY
Users are responsible for familiarizing themselves with product instructions and information. Visit our website at
www.3M.com/foodsafety, or contact your local 3M representative or distributor for more information.
When selecting a test method, it is important to recognize that external factors such as sampling methods, testing
protocols, sample preparation, handling, and laboratory technique may influence results.
It is the user’s responsibility in selecting any test method or product to evaluate a sufficient number of samples with the
appropriate matrices and microbial challenges to satisfy the user that the chosen test method meets the user’s criteria.
It is also the user’s responsibility to determine that any test methods and results meet its customers’ and suppliers’
requirements.
As with any test method, results obtained from use of any 3M Food Safety product do not constitute a guarantee of the
quality of the matrices or processes tested.
Explanation of Safety Related Symbols
Attention: Read Accompanying Documentation
CAUTION: Recycle 3M Clean-Trace Luminometer to
avoid environmental contamination. This product contains
recyclable parts. For information on recycling - please
contact your nearest 3M Service Center for advice.
WEEE mark - This product contains electrical and
electronic components and must not be disposed of using
standard refuse collection. Please consult local directives
for disposal of electrical and electronic equipment.
UL NRTL mark (US and Canada electrical safety)
CE mark (conforms to applicable requirements for
European Economic Area).
RCM mark (Australia electrical safety and EMC)
The 3M Clean-Trace Luminometer model number, which is
LM1.
The 3M Clean-Trace Luminometer serial number