4RF Aprisa SR+ User Manual - page 108
106 | Managing the Radio
Aprisa SR User Manual
Ethernet > Advanced
This page is only available if the Ethernet traffic option has been licensed (see ‘Maintenance > Licence’ on
page 131).
ETHERNET SUPPORT
There must always be an Ethernet port available for management, so both Ethernet ports cannot be set to
User Only.
Ethernet Port 1 Function
This parameter sets the use for the Ethernet port 1. The default setting is Management and User.
Ethernet Port Function
Function
Management Only
The Ethernet port is only used for management of the FAN.
Management and User
The Ethernet port is used for management of the FAN and
User traffic over the radio link.
User Only
The Ethernet port is only used for User traffic over the radio
link.
Ethernet Port 2 Function
This parameter sets the use for the Ethernet port 2. The default setting is Management and User.
Ethernet Port Function
Function
Management Only
The Ethernet port is only used for management of the FAN.
Management and User
The Ethernet port is used for management of the FAN and
User traffic over the radio link.
User Only
The Ethernet port is only used for User traffic over the radio
link. This option is not available if this radio is part of a
Protected Station.