4RF Aprisa SR+ User Manual - page 147
Managing the Radio | 145
Aprisa SR User Manual
Software > Setup
This page provides the setup of the USB flash drive containing a Software Pack.
USB SETUP
USB Boot Upgrade
This parameter determines the action taken when the radio power cycles and finds a USB flash drive in the
Host port. The default setting is ‘Load and Activate’.
USB Boot Upgrade
Function
Load and Activate
New software will be uploaded from a USB flash drive in to the
Aprisa SR when the radio is power cycled and activated
automatically.
Load Only
New software will be uploaded from a USB flash drive in to the
Aprisa SR when the radio is power cycled. The software will need
to be manually activated (see ‘Software > Manager’ on page 149).
Disabled
Software will not be uploaded from a USB flash drive into the
Aprisa SR when the radio is power cycled.
Note: This parameter must be set to ‘Disabled’ if the ‘File Transfer and Activate’ method of upgrade is
used. This ‘Disabled’ setting prevents the radio from attempting another software upload when the radio
boots (which it does automatically after activation).