4RF Aprisa SR+ User Manual - page 177
Managing the Radio | 175
Aprisa SR User Manual
Protected Station: Ethernet > Port Setup
This page provides the setup for the Protected Station Ethernet ports settings.
ETHERNET PORT 1
Status
The Ethernet port status can be set to enabled or disabled. The default setting is enabled.
Ethernet Data Mode
Function
Enabled
Enables Ethernet data communication over the radio link.
Disabled
Disables Ethernet data communication over the radio link.
Mode
The Ethernet port mode can be set to Auto or Manual. The default setting is Auto.
Auto provides auto selection of Ethernet Port Speed and Ethernet Duplex.
If Ethernet port mode of Manual is selected, the Ethernet Port Speed and Ethernet Duplex can be set.
ETHERNET PORT 2
As stated, setting ethernet port 2 is disabled when terminal is protected. This is because Ethernet port 2
is used for communication between the Primary and Secondary radios.
LOCAL SWITCH
As stated, local switch is always enabled when terminal is protected.