4RF Aprisa SR+ User Manual - page 97
Managing the Radio | 95
Aprisa SR User Manual
Serial > Port Setup
This page provides the setup for the serial port settings.
SERIAL PORTS SETTINGS
Note: The current Aprisa SR has one serial port so there will be only one record.
Name
This parameter sets the port name which can be up to 32 characters.
Name
Function
SerialPort1
This is the normal RS-232 serial port provided with the RJ45
connector.
USB Serial Port
This is the additional RS-232 serial port provided with the USB Host
Port
connector with a USB to RS-232 RJ45 converter cable
(see ‘USB RS-232 Serial Port’ on page 40).
Mode
This parameter defines the mode of operation of the serial port. The default setting is Standard.
Mode
Function
Disabled
The serial port is not required.
Standard
The serial port is communicating with serial ports on other
stations.
Terminal Server
A base station Ethernet port can communicate with both Ethernet
ports and serial ports on remote stations.
RS-232 traffic is encapsulated in IP packets (see ‘Serial > Port
Setup’ TERMINAL SERVER SETTINGS on page 97).