4RF Aprisa SR+ User Manual - page 150
148 | Managing the Radio
Aprisa SR User Manual
To transfer software into the Aprisa SR radio:
USB Transfer Method
1. Unzip the software release files in to the root directory of a USB flash drive.
2. Insert the USB flash drive into the Host Port
.
3. Click on ‘Start Transfer’.
4. When the transfer is completed, remove the USB flash drive from the Host Port. If the SuperVisor ‘USB
Boot Upgrade’ setting is set to ‘Disabled’ (see ‘USB Boot Upgrade’ on page 145), the USB flash drive
doesn’t need to be removed as the radio won’t try to load from it.
Go to Supervisor > Software > Manager and activate the Software Pack (see ‘Software > Manager’ on page
149). The radio will reboot automatically.
If the file transfer fails, check the Event History page (see ‘Events > Event History’ on page 136) for more
details of the transfer.
FTP Method
1. Unzip the software release files in to a temporary directory.
2. Open the FTP server and point it to the temporary directory.
3. Enter the FTP server IP address, Username and password into SuperVisor.
4. Click on ‘Start Transfer’.
Go to Supervisor > Software > Manager and activate the Software Pack (see ‘Software > Manager’ on page
149). The radio will reboot automatically.
If the file transfer fails, check the Event History page (see ‘Events > Event History’ on page 136) for more
details of the transfer.