4RF Aprisa SR+ User Manual - page 191
Managing the Radio | 189
Aprisa SR User Manual
To transfer software into the Aprisa SR primary radio:
Primary USB Transfer Method
1. Unzip the software release files in to the root directory of a USB flash drive.
2. Insert the USB flash drive into the primary radio Host Port
.
3. Click on ‘Start Transfer’.
4. When the transfer is completed, remove the USB flash drive from the primary radio Host Port. If the
SuperVisor ‘USB Boot Upgrade’ setting is set to ‘Disabled’ (see ‘USB Boot Upgrade’ on page 145), the
USB flash drive doesn’t need to be removed as the radio won’t try to load from it.
5. Go to ‘Protected Station: Software > Manager’ on page 194 to activate the Software Pack. The radio
will reboot automatically.
FTP Method
1. Unzip the software release files in to a temporary directory.
2. Open the FTP server and point it to the temporary directory.
3. Enter the FTP server IP address, Username and password into SuperVisor.
4. Click on ‘Start Transfer’.
5. Go to ‘Protected Station: Software > Manager’ on page 194 to activate the Software Pack. The radio
will reboot automatically.
Transfer from Secondary Unit
1. Select Transfer from Secondary Unit.
2. Click on ‘Start Transfer’.
3. Go to ‘Protected Station: Software > Manager’ on page 194 to activate the Software Pack. The radio
will reboot automatically.