1. DL manuals
  2. 8e6 Technologies
  3. Network Hardware
  4. Enterprise Filter Authentication R3000
  5. User Manual

8e6 Technologies Enterprise Filter Authentication R3000 User Manual

Manual is about: Enterprise Filter

Summary of Enterprise Filter Authentication R3000

  • Page 2

    Ii 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide.

  • Page 3: R3000 E

    8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide iii r3000 e nterprise f ilter u ser g uide © 2008 8e6 technologies all rights reserved. Version 1.02, published august 2008 to be used with the r3000 authentication user guide version 1.01 for software release 2.1.00 printed in the united ...

  • Page 4

    Iv 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide.

  • Page 5: Ontents

    8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide v c ontents i ntroductory s ection .................................................. 1 r3000 enterprise filter ............................................................... 1 about this user guide ..........................................

  • Page 6

    C ontents vi 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide service ports . ........................................................................... 25 rules ........................................................................................ 25 minimum filtering...

  • Page 7

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide vii source server failure scenarios .............................................. 47 establish backup procedures ................................................... 47 use a backup file to set up a source server ...

  • Page 8

    C ontents viii 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide enable local filtering options...................................... 75 http filtering ..................................................................... 75 enable http packet splitting detection ............

  • Page 9

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide ix enable, disable password expiration .............................. 105 enable, disable account lockout .................................... 106 logon management ....................................................

  • Page 10

    C ontents x 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide alert settings window . ............................................................ 133 enable the alert feature .................................................. 135 modify alert settings .......................

  • Page 11

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide xi use a local proxy server ................................................ 173 use proxy port 80 ............................................................. 173 authentication ....................................

  • Page 12

    C ontents xii 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide reset all workstations................................................ 198 lock page................................................................... 199 overblocking or underblocking...........................

  • Page 13

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide xiii add, edit entries ............................................................... 234 preview sample quota notice page ................................ 235 cmc management ........................................

  • Page 14

    C ontents xiv 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide override account window ....................................................... 280 add an override account .................................................. 281 category profile ................................

  • Page 15

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide xv view the emergency software update process ............... 315 download the software update log file .......................... 316 library lookup ..................................................................

  • Page 16

    C ontents xvi 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide upload a list of url keyword additions.................... 340 upload a list of url keyword deletions.................... 341 reload the library............................................................. 341...

  • Page 17

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide xvii real time probe reports ................................................. 361 create a real time probe .......................................... 361 view real time probe details ................................

  • Page 18

    C ontents xviii 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide filter options..................................................................... 392 create, edit the filter options .................................... 392 exception url window ............................

  • Page 19

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide xix individual ip profile window .................................................... 425 exception url window ........................................................... 425 time profile window .....................

  • Page 20: / P

    C ontents xx 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide upload a master list of search engine keywords............ 451 reload the library............................................................. 451 delete category ..................................................

  • Page 21

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide xxi error messages ................................................................ 467 weekly update (7 days library) ............................................. 468 summary messages ..............................

  • Page 22

    C ontents xxii 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide if pop-up blocking is enabled ................................................. 490 temporarily disable pop-up blocking ..................................... 490 mozilla firefox pop-up blocker ..................

  • Page 23

    C ontents 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide xxiii add, remove mobile r3000 ........................................ 519 add, remove internal r3000 ....................................... 520 add proxy address or host name................................ 521...

  • Page 24

    C ontents xxiv 8 e 6 t echnologies , r3000 e nterprise f ilter a uthentication u ser g uide glossary ........................................................................................ 547 i ndex ........................................................................... 555.

  • Page 25: Ntroductory

    I ntroductory s ection r3000 e nterprise f ilter 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 1 i ntroductory s ection r3000 enterprise filter 8e6 technologies’ r3000 enterprise filter offers an enhanced solution for internet filtering on a network, based on the methodologies employe...

  • Page 26

    I ntroductory s ection a bout this u ser g uide 2 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide see the r3000 authentication user guide at http:// www.8e6.Com/docs/r3000_auth2_ug.Pdf for information on authentication. This user guide is organized into the following sections: • introdu...

  • Page 27: How to Use This User Guide

    I ntroductory s ection h ow to u se this u ser g uide 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3 reporter (er) application. Appendix g includes informa- tion about raid maintenance and troubleshooting on an r3000 “h”, “sl”, or “hl” server. Appendix h features a glossary of techni...

  • Page 28: Terminology

    I ntroductory s ection h ow to u se this u ser g uide 4 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide terminology the following terms are used throughout this user guide. Sample images (not to scale) are included for each item. • alert box - a message box that opens in response to an ...

  • Page 29

    I ntroductory s ection h ow to u se this u ser g uide 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 5 entry, or displays pertinent information. A text box is a type of field. • frame - a boxed-in area in a dialog box, window, or screen that includes a group of objects such as fields, ...

  • Page 30

    I ntroductory s ection h ow to u se this u ser g uide 6 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • pop-up box or pop-up window - a box or window that opens after you click a button in a dialog box, window, or screen. This box or window may display information, or may require you ...

  • Page 31

    I ntroductory s ection h ow to u se this u ser g uide 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 7 • sub-topic - a subset of a main topic that displays as a menu item for the topic. The menu of sub-topics opens when a perti- nent topic link in the left panel—the navigation panel—of...

  • Page 32

    I ntroductory s ection h ow to u se this u ser g uide 8 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • tree - a tree displays in the naviga- tion panel of a screen, and is comprised of a hierarchical list of items. An entity associated with a branch of the tree is preceded by a plus ...

  • Page 33: Overview

    I ntroductory s ection o verview 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 9 overview the r3000’s administrator console is used by the global administrator—and group administrator, as required—to configure the r3000 server to perform the following basic functions: • filter urls (w...

  • Page 34: Environment Requirements

    I ntroductory s ection e nvironment r equirements 10 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide environment requirements workstation requirements minimum system requirements for the administrator include the following: • windows 2000 or later operating system (not compatible with w...

  • Page 35: Operational Modes

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 11 chapter 1: filtering operations operational modes based on the setup of your network, the r3000 can be configured to use one of these operational modes for filtering the network:...

  • Page 36: Invisible Mode

    I ntroductory s ection c hapter 1: f iltering o perations 12 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide invisible mode if the r3000 is set up in the invisible mode, the unit will filter all connections on the ethernet between client pcs and the internet, without stopping each ip pa...

  • Page 37

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 13 when users (client pcs) make internet requests, the traffic flows (1) through the network path without interruption. The r3000 captures the request as the user’s request (2) leav...

  • Page 38: Router Mode

    I ntroductory s ection c hapter 1: f iltering o perations 14 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide router mode if the r3000 is set up in the router mode, the unit will act as an ethernet router, filtering ip packets as they pass from one card to another. While all original pac...

  • Page 39: Firewall Mode

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 15 warning: 8e6 recommends contacting one of our solutions engineers if you need assistance with router mode setup proce- dures. Firewall mode the firewall mode is a modification of...

  • Page 40

    I ntroductory s ection c hapter 1: f iltering o perations 16 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide the firewall mode cannot be used with any other mode (invisible or router). Figure 1:1-4 illustrates an example of a firewall mode setup in which requests are never sent to the c...

  • Page 41: Group Types

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 17 group types after the operational filtering mode is configured on the r3000, the group type(s) that will be used on the r3000 must be set up so that filtering can take place. In ...

  • Page 42: Ip Groups

    I ntroductory s ection c hapter 1: f iltering o perations 18 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide ip groups the ip group type is represented in the tree by the ip icon . A master ip group is comprised of sub-group members and/or individual ip members . The global administrato...

  • Page 43: Filtering Profile Types

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 19 filtering profile types a filtering profile is used by all users who are set up to be filtered on the network. This profile consists of rules that dictate whether a user has acce...

  • Page 44

    I ntroductory s ection c hapter 1: f iltering o perations 20 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • override account profile - set up in either the global group section or the master group section of the console. • lock profile - set up under x strikes blocking in the filter ...

  • Page 45: Static Filtering Profiles

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 21 static filtering profiles static filtering profiles are based on fixed ip addresses and include profiles for master ip groups and their members. Master ip group filtering profile...

  • Page 46: Active Filtering Profiles

    I ntroductory s ection c hapter 1: f iltering o perations 22 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide active filtering profiles active filtering profiles include the global group profile, over- ride account profile, time profile, and lock profile. Note: for information about auth...

  • Page 47: Filtering Profile Components

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 23 filtering profile components filtering profiles are comprised of the following compo- nents: • library categories - used when creating a rule, minimum filtering level, or filteri...

  • Page 48: Library Categories

    I ntroductory s ection c hapter 1: f iltering o perations 24 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide library categories a library category contains a list of web site addresses and keywords for search engines and urls that have been set up to be blocked or white listed. Library ...

  • Page 49: Service Ports

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 25 service ports service ports are used when setting up filter segments on the network (the range of ip addresses/netmasks to be detected by the r3000), the global (default) filteri...

  • Page 50: Filter Settings

    I ntroductory s ection c hapter 1: f iltering o perations 26 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: if the minimum filtering level is not set up, global (default) filtering settings will apply instead. If an override account is established at the ip group level for a memb...

  • Page 51: Filtering Rules

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 27 • ignore - if the filter segment detected on the network has a service port set up to be ignored, that service port will be bypassed filtering rules filtering levels applied 1. T...

  • Page 52

    I ntroductory s ection c hapter 1: f iltering o perations 28 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: a radius profile is another type of authentication profile and is weighted the same as nt/ldap authentication profiles in the precedence hierarchy. 7. An override account p...

  • Page 53

    I ntroductory s ection c hapter 1: f iltering o perations 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 29 fig. 1:1-7 sample filtering hierarchy diagram.

  • Page 54: Web Access Logging

    I ntroductory s ection c hapter 2: l ogging and b locking 30 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 2: logging and blocking web access logging one of the primary functions of the r3000 is to log the activity of users on the internet. Information captured in the log can ...

  • Page 55: Im Blocking

    I ntroductory s ection c hapter 2: l ogging and b locking 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 31 instant messaging, peer-to-peer blocking the r3000 has options for blocking and/or logging the use of instant messaging and peer-to-peer services, and makes use of intelligent fo...

  • Page 56: P2P Blocking

    I ntroductory s ection c hapter 2: l ogging and b locking 32 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide p2p blocking peer-to-peer (p2p) involves communication between computing devices—desktops, servers, and other smart devices—that are linked directly to each other. Using this fea...

  • Page 57: Using Im And P2P

    I ntroductory s ection c hapter 2: l ogging and b locking 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 33 using im and p2p to solely log im and/or p2p user activity, the pattern blocking setting needs to be enabled in the filter window. To additionally block specified groups and/or u...

  • Page 58: Block P2P For All Users

    I ntroductory s ection c hapter 2: l ogging and b locking 34 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide block p2p for all users to block p2p for all users on the network: • the pattern blocking option in the filter window must be activated • the global filtering profile must have t...

  • Page 59

    I ntroductory s ection c hapter 2: l ogging and b locking 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 35 block p2p for a specific entity to block p2p for a specified group or user: • the pattern blocking option in the filter window must be activated • the pr2pr library category must...

  • Page 60: R3000 Synchronization

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 36 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 3: synchronizing multiple units r3000 synchronization the r3000 can function in one of three modes—“stand alone” mode, “source” mode, or “target” mode—based on t...

  • Page 61: Unctional

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 37 f unctional m odes stand alone mode in the stand alone mode, the r3000 functions as the only internet filter on the network. This mode is used if there is only one r3000...

  • Page 62: Synchronization Setup

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 38 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide synchronization setup to set up synchronization on an r3000 unit, a selection must be made in setup window from the system section of the r3000 console to specify whethe...

  • Page 63

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 39 warning: if an r3000 server is set up in the target mode with a nat device between the target and source server, be sure that ports 26262 and 26268 are open on the targe...

  • Page 64

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 40 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide if the target server is rebooted for any reason (loss of power etc.) upon bootup, the target server will actively download and apply the current running configuration fr...

  • Page 65: Delays In Synchronization

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 41 delays in synchronization when a filtering profile is applied to the source server, there is a slight delay in the time it takes to apply the profile to the target serve...

  • Page 66

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 42 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide synchronized, non-synchronized items it is important to note that while some items are synchro- nized to the target r3000s, they do not become permanent configurations o...

  • Page 67: Synchronize All Items

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 43 synchronize all items the following lists show which items will be synchronized when the option to synchronize all items is selected. Synchronized items (all) • 8e6 libr...

  • Page 68: Non-Synchronized Items

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 44 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide non-synchronized items • filter control settings • virtual ip and authentication ip addresses • ip addresses • default routes • patch application • synchronization setti...

  • Page 69: Non-Synchronized Items

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 45 synchronize only library items the following lists show which items will be synchronized when the option to synchronize only library items is selected. Synchronized item...

  • Page 70

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 46 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • nt/ldap user/group: additions/deletions, changes, filter changes, profile activation/deactivation • filter control settings • virtual ip and authentication ip addresse...

  • Page 71: Establish Backup Procedures

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 47 server maintenance procedures source server failure scenarios in the event that the source r3000 unit should fail, the target servers will continue to run using the last...

  • Page 72

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 48 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide use a backup file to set up a source server in the event of a source server failure, the global adminis- trator should designate a target server as the new source server...

  • Page 73

    I ntroductory s ection c hapter 3: s ynchronizing m ultiple u nits 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 49 set up a replacement target server once the original source server is replaced or repaired, it can then be configured to replace the empty spot created by the movement o...

  • Page 74: Chapter 4: Getting Started

    I ntroductory s ection c hapter 4: g etting s tarted 50 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 4: getting started initial setup to initially set up your r3000 server, follow the instructions in the quick start guide, the booklet packaged with your r3000 unit. This guide...

  • Page 75

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 51 fig. 1:4-1 r3000 introductory window note: the r3000 introductory window must be left open throughout your session. This window displays minimized when the login dialog box opens. 4. ...

  • Page 76

    I ntroductory s ection c hapter 4: g etting s tarted 52 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: see chapter 1: system screen in the global administrator section for information on logging into the r3000 interface if your password has expired. 5. Click ok to close the login...

  • Page 77: Last Library Update Message

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 53 last library update message if it has been more than seven days since the r3000 last received updates to library categories, upon logging into the administrator console a pop-up dialo...

  • Page 78

    I ntroductory s ection c hapter 4: g etting s tarted 54 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide fig. 1:4-4 welcome screen , last library update text click the checkbox “do not show “old library warning” dialog box in future” to disable the last library update message pop-up box....

  • Page 79: Navigation Tips

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 55 navigation tips access main sections the administrator console is organized into six sections, each accessible by clicking the corresponding button in the navigational bar at the top ...

  • Page 80

    I ntroductory s ection c hapter 4: g etting s tarted 56 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • help - clicking this button displays the help screen. This screen includes navigational tips and a link to the pdf copy of this user guide: fig. 1:4-5 help screen.

  • Page 81: Help Features

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 57 help features help features provide information about how to use windows in the administrator console. Such features include help topics and tooltips. Access help topics each of the m...

  • Page 82: Tooltips

    I ntroductory s ection c hapter 4: g etting s tarted 58 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide tooltips in any window that features the icon, additional information about that window can be obtained by hovering over that icon with your mouse, or by pressing the f1 key on your k...

  • Page 83

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 59 • help pop-up box the help pop-up box opens when you press the f1 key on your keyboard: fig. 1:4-8 help pop-up box click ok to close the pop-up box. Screen and window navigation all s...

  • Page 84: Topic Links

    I ntroductory s ection c hapter 4: g etting s tarted 60 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide topic links in system, library, and reporting screens, the navigation panel contains topic links. By clicking a topic link, the window for that topic displays in the right panel: fig....

  • Page 85: Select Sub-Topics

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 61 select sub-topics some topics in system and library screens consist of more than one window. For these topics, clicking a topic link opens a menu of sub-topics: fig. 1:4-10 sub-topics...

  • Page 86: Navigate A Tree List

    I ntroductory s ection c hapter 4: g etting s tarted 62 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide navigate a tree list tree lists are included in the navigation panel of group and library screens. Fig. 1:4-11 tree menu a tree is comprised of a hierarchical list of items. An entity...

  • Page 87

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 63 tree list topics and sub-topics group and library tree lists possess a menu of topics and sub-topics. Topics in the tree list display by default when the tree is opened. Examples of t...

  • Page 88: Navigate A Window With Tabs

    I ntroductory s ection c hapter 4: g etting s tarted 64 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide navigate a window with tabs in each section of the console, there are windows with tabs. When selecting a window with tabs from the navigation panel, the main tab for that window disp...

  • Page 89: Console Tips And Shortcuts

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 65 console tips and shortcuts the following list of tips and shortcuts is provided to help you use windows in the administrator console with greater efficiency. Navigation path the navig...

  • Page 90: Refresh The Console

    I ntroductory s ection c hapter 4: g etting s tarted 66 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide refresh the console press f5 on your keyboard to refresh the administrator console. This feature is useful in the event that more than one browser window is open simultaneously for th...

  • Page 91

    I ntroductory s ection c hapter 4: g etting s tarted 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 67 • to paste text into an empty field, place the cursor in the field and then press the ctrl and v keys. • to copy over existing text, highlight text currently in the field and then pre...

  • Page 92: Log Off

    I ntroductory s ection c hapter 4: g etting s tarted 68 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • if the ip address field in the window on the console is empty, in this pop-up window enter the ip address, specify the dotted decimals notation netmask, and then click calculate to ...

  • Page 93: Lobal

    G lobal a dministrator s ection i ntroduction 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 69 g lobal a dministrator s ection introduction the global administrator section of this user guide is comprised of four chapters, based on the layout of the administrator console. This section...

  • Page 94: Chapter 1: System Screen

    G lobal a dministrator s ection c hapter 1: s ystem screen 70 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 1: system screen the system screen is comprised of windows used for configuring and maintaining the server to authenticate users, and to filter, log, or block specified ...

  • Page 95

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 71 notes: if the synchronization feature is used and an r3000 is set up in the source mode, the cmc management topic and associated sub-topics are also available. If the synchroniz...

  • Page 96: Control

    G lobal a dministrator s ection c hapter 1: s ystem screen 72 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide control control includes options for controlling basic r3000 server functions. Click the control link to view a menu of sub- topics: filter, block page authentication, shutdown,...

  • Page 97: Filter Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 73 filter window the filter window displays when filter is selected from the control menu. This window is used for specifying network filtering preferences on this server. Fig. 2:1...

  • Page 98: Local Filtering

    G lobal a dministrator s ection c hapter 1: s ystem screen 74 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide types set up to be blocked). Target(s) filtering will only display if this server being configured is set up for synchro- nization in the source mode. This frame is used for spe...

  • Page 99: Http Filtering

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 75 enable local filtering options to enable local filtering, click “on”. The server will filter the specified range to detect on the network. To enable the detection of vlan traffi...

  • Page 100: Https Filtering

    G lobal a dministrator s ection c hapter 1: s ystem screen 76 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide https filtering specify your preference for filtering https sites in the https filtering frame. Select from the following settings for the https filtering level: • “none” - if y...

  • Page 101: Service Control

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 77 service control in the service control frame, indicate whether or not pattern blocking with be enabled or disabled. Enable pattern blocking by default, pattern blocking is disab...

  • Page 102: Disable Pattern Blocking

    G lobal a dministrator s ection c hapter 1: s ystem screen 78 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide disable pattern blocking click “off” to disable pattern blocking. Note: after making all entries in this window, click apply. Target(s) filtering the target(s) filtering frame o...

  • Page 103

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 79 block page authentication window the block page authentication window displays when block page authentication is selected from the control menu. This feature is used for enterin...

  • Page 104

    G lobal a dministrator s ection c hapter 1: s ystem screen 80 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide enter, edit block page options note: if you are not using authentication, and/or if your users do not have override accounts set up, you do not need to select any option at the ...

  • Page 105

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 81 2. If the re-authentication option was selected, in the logon script path field, \\pdcshare\scripts displays by default. In this field, enter the path of the logon script that t...

  • Page 106: Block Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 82 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide block page when a user attempts to access internet content set up to be blocked, the block page displays on the user’s screen: fig. 2:1-5 sample block page by default, the follo...

  • Page 107

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 83 • blocked url field - the url the user attempted to access displays. By default, the following standard links are included in the block page: • help - clicking this link takes t...

  • Page 108: Options Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 84 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide options page the options page displays when the user clicks the following link in the block page: for further options, click here. Fig. 2:1-6 options page the following items pr...

  • Page 109: Option 2

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 85 note: information about option 1 is included in the r3000 authentication user guide. Option 2 the following phrase/link displays, based on options selected at the re-authenticat...

  • Page 110: Option 3

    G lobal a dministrator s ection c hapter 1: s ystem screen 86 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide option 3 option 3 is included in the options page, if “override account” was selected at the re-authentication options field. This option is used by any user who has an override...

  • Page 111: Shutdown Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 87 shutdown window the shutdown window displays when shutdown is selected from the control menu. This window is used for powering off the server. Fig. 2:1-9 shutdown window shut do...

  • Page 112: Reboot Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 88 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide reboot window the reboot window displays when reboot is selected from the control menu. This window is used for reconnecting the server on the network. Fig. 2:1-10 reboot window.

  • Page 113: Reboot The Server

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 89 reboot the server 1. In the reboot frame, click reboot to open the reboot r3000 enterprise filter dialog box: fig. 2:1-11 reboot r3000 dialog box 2. Click yes to close the dialo...

  • Page 114

    G lobal a dministrator s ection c hapter 1: s ystem screen 90 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide after the server is rebooted, the r3000 enterprise filter status message box closes, and the r3000 ready alert box opens: fig. 2:1-14 r3000 ready alert box the server connected ...

  • Page 115: Network

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 91 network network includes options for configuring the r3000 server on the network. Click the network link to view a menu of sub-topics: lan settings, ntp servers, regional settin...

  • Page 116: Lan Settings Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 92 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide lan settings window the lan settings window displays when lan settings is selected from the network menu. This window is used for configuring network connection settings for the...

  • Page 117: Specify Lan Settings

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 93 specify lan settings 1. In the host name field, the default host name is r3000. Enter up to 50 alphanumeric characters for the name of the host for this server, such as r3000.Lo...

  • Page 118: Ntp Servers Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 94 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide ntp servers window the ntp servers window displays when ntp servers is selected from the network menu. This window is used for specifying ip addresses of servers running network...

  • Page 119: Add An Ntp Server

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 95 specify network time protocol servers in the details frame, three ntp server ip addresses display by default in the servers list box. These ip addresses are: 128.59.35.142, 142....

  • Page 120: Regional Setting Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 96 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide regional setting window the regional setting window displays when regional setting is selected from the network menu. This window is used for specifying the time zone to be used...

  • Page 121

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 97 specify the time zone, language set in the details frame, the region “us” and the location “pacific” display by default. To change these settings: 1. At the region pull-down men...

  • Page 122

    G lobal a dministrator s ection c hapter 1: s ystem screen 98 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide block page route table window the block page route table window displays when block page route table is selected from the network menu. This window is used for building and main...

  • Page 123: Add A Router

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 99 add a router in the route table frame: 1. Enter the ip address. 2. Select the network subnet mask from the pull-down menu. 3. In the gateway field, enter the ip address of the p...

  • Page 124: Administrator

    G lobal a dministrator s ection c hapter 1: s ystem screen 100 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide administrator administrator window the administrator window displays when administrator is selected from the navigation panel. This window is used for adding and maintaining gl...

  • Page 125: View Administrator Accounts

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 101 tip: the default username is admin and the password is user3. 8e6 recommends that you retain this default account and pass- word in the event that the r3000 unit cannot be acce...

  • Page 126

    G lobal a dministrator s ection c hapter 1: s ystem screen 102 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide edit an administrator account to change an administrator’s password and/or account type: 1. Select the username from the current user list box; this action populates the accoun...

  • Page 127: Secure Logon

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 103 secure logon secure logon includes options for setting user passwords to expire after a designated number of days, and/or locking out users from the r3000 after unsuccessfully ...

  • Page 128: Logon Settings Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 104 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide logon settings window the logon settings window displays when logon settings is selected from the secure logon menu. This window is used for enabling the password expiration fe...

  • Page 129

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 105 enable, disable password expiration in the logon expiration frame, at the number of days prior to expiration [1-365] field, specify the number of days logon passwords will be e...

  • Page 130

    G lobal a dministrator s ection c hapter 1: s ystem screen 106 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide enable, disable account lockout 1. In the logon options frame, enable any of the following options: • at the lockout by username field, click the radio button corresponding to ...

  • Page 131

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 107 • at the failed password attempts timespan (in minutes) [1-1440] field—with the lockout by user- name and/or lockout by ip address option(s) enabled—enter the number of minutes...

  • Page 132: Logon Management

    G lobal a dministrator s ection c hapter 1: s ystem screen 108 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide logon management the logon management window displays when logon management is selected from the secure logon menu. This window is used for viewing the status of user accounts—...

  • Page 133: View Account Status

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 109 view user account status, unlock username view account status the all accounts status frame displays password statuses of current login accounts set up in this r3000 being conf...

  • Page 134: Unlock A Username

    G lobal a dministrator s ection c hapter 1: s ystem screen 110 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide unlock a username to unlock a username: 1. Select the account name from the all accounts status frame by clicking on it to highlight it. 2. Click unlock to open the dialog box ...

  • Page 135

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 111 view admin, sub admin interface access to view the areas of the interface accessible by a global or nt/ldap group administrator: 1. Select the admin or sub admin username from ...

  • Page 136: Diagnostics

    G lobal a dministrator s ection c hapter 1: s ystem screen 112 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide diagnostics diagnostics includes options for setting up or running processes for maintaining the server. Click the diagnostics link to view a menu of sub-topics: system command...

  • Page 137: System Command Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 113 system command window the system command window displays when system command is selected from the diagnostics menu. This window is used for viewing server statistics and for pe...

  • Page 138

    G lobal a dministrator s ection c hapter 1: s ystem screen 114 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide perform a diagnostic test, view data 1. Select a diagnostic tool from the command pull-down menu: ping(ping), traceroute(trace route), ps(process list), top(top cpu processes),...

  • Page 139: Command Selections

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 115 3. Click the “x” in the upper right corner of the pop-up window to close it. Command selections ping the ping diagnostic tool is used for verifying whether the r3000 can commun...

  • Page 140: Top Cpu Processes

    G lobal a dministrator s ection c hapter 1: s ystem screen 116 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide top cpu processes the top cpu processes diagnostic tool is used for analyzing how much memory and cpu power is being consumed by which processes. When execute is clicked, the p...

  • Page 141: Current Memory Usage

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 117 current memory usage when current memory usage is selected and execute is clicked, the pop-up window shows the amount of memory being used, and the amount of memory available f...

  • Page 142: System Uptime

    G lobal a dministrator s ection c hapter 1: s ystem screen 118 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide system uptime the system uptime diagnostic tool is used for showing the amount of time the r3000 has been "up" and running. When execute is clicked, the pop-up window displays ...

  • Page 143: View Log File Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 119 view log file window the view log file window displays when view log file is selected from the diagnostics menu. This window is used for viewing the most recent log file result...

  • Page 144: View Log Results

    G lobal a dministrator s ection c hapter 1: s ystem screen 120 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view log results in the log file details frame: 1. Select the type of log file to view: • “realtime traffic log (shadow.Log)” - used for viewing the internet activity of all us...

  • Page 145

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 121 fig. 2:1-31 view log file, results window 4. Click the “x” in the upper right corner of the pop-up window to close it..

  • Page 146: Troubleshooting Mode Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 122 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide troubleshooting mode window the troubleshooting mode window displays when trouble- shooting is selected from the diagnostics menu. This window is used if the server is not send...

  • Page 147: Use The Troubleshooting Mode

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 123 use the troubleshooting mode 1. Click enable to begin working in the troubleshooting mode. 2. In the packet logging frame, select the packet logging time from the available sel...

  • Page 148

    G lobal a dministrator s ection c hapter 1: s ystem screen 124 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 8. After performing the fixes on the r3000 server, return to this window and click disable to resume filtering the network. Active profile lookup window the active profile look...

  • Page 149

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 125 verify whether a profile is active 1. In the user ip/mac address field, enter the ip address or mac address of the end user. 2. Click lookup to verify whether or not a profile ...

  • Page 150

    G lobal a dministrator s ection c hapter 1: s ystem screen 126 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • profile type - type of profile: • regular profiles - ip group, sub-group, individual or mac profile • global profile - global group profile • override profiles - override acc...

  • Page 151

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 127 • warn- urls in this category will warn the end user that the url he/she requested can be accessed, but may be against the organization’s policies. The end user can view the ur...

  • Page 152

    G lobal a dministrator s ection c hapter 1: s ystem screen 128 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • blocked ports (optional) - ports that have been set up to be blocked, if established. • redirect url (optional) - the url that will be used for redirecting the user away from...

  • Page 153: Admin Audit Trail Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 129 admin audit trail window the admin audit trail window displays when admin audit trail is selected from the diagnostics menu. This window is used for specifying ftp criteria so ...

  • Page 154: Specify Ftp Criteria

    G lobal a dministrator s ection c hapter 1: s ystem screen 130 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide specify ftp criteria 1. Enter the ip address of the ftp server. 2. The log will be sent to the current default directory, unless a remote directory is specified. 3. At the tran...

  • Page 155: View

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 131 view view the log of administrator changes to view the log, click the view tab: fig. 2:1-36 admin audit trail window, view tab click view log to display data on recent activity...

  • Page 156: Alert

    G lobal a dministrator s ection c hapter 1: s ystem screen 132 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide alert alert includes options for setting up alert emails that notify designated individuals of problems on the network. Click the alert link to view a menu of sub-topics: alert...

  • Page 157: Alert Settings Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 133 alert settings window the alert settings window displays when alert settings is selected from the alert menu. This window is used for setting up and maintaining email addresses...

  • Page 158

    G lobal a dministrator s ection c hapter 1: s ystem screen 134 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide a misconfiguration was made that causes a process to be unable to load on the system—the r3000 repeats this procedure until an administrator fixes the error. • hard drive utili...

  • Page 159: Enable The Alert Feature

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 135 enable the alert feature by default, the “disable” radio button is selected. To enable the feature for sending automated email notifications: 1. Click the “enable” radio button...

  • Page 160: Smtp Server Settings Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 136 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide smtp server settings window the smtp server settings window displays when smtp server settings is selected from the alert menu. This window is used for entering settings for th...

  • Page 161: Verify Smtp Settings

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 137 that can be placed into the queue awaiting an available outbound connection. 4. By default, authentication is disabled. Click “enable” if a username and password are required f...

  • Page 162: Patch

    G lobal a dministrator s ection c hapter 1: s ystem screen 138 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide patch patch includes options for uploading software updates. Click the patch link to view a menu of sub-topics: local patch, and patch update log. Fig. 2:1-41 system screen, pa...

  • Page 163: Local Patch Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 139 local patch window the local patch window displays when local patch is selected from the patch menu. This window is used for viewing information about software updates previous...

  • Page 164

    G lobal a dministrator s ection c hapter 1: s ystem screen 140 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide read information about a software update in either the available patches frame or the history of patches frame, the date, name, and synopsis are included for each software upda...

  • Page 165

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 141 select and apply a software update to apply a software update: 1. Go to the available patches frame and select the soft- ware update to be applied. Notes: software updates must...

  • Page 166

    G lobal a dministrator s ection c hapter 1: s ystem screen 142 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 4. After reading the contents of the end user license agreement, click yes if you agree to its terms. This action closes the eula dialog box and opens the alert box veri- fying...

  • Page 167

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 143 note: 8e6 recommends performing a backup of configuration files after applying a software update. (see the backup/restore window in this chapter for information on performing a...

  • Page 168: Patch Update Log Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 144 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide patch update log window the patch update log window displays when patch update log is selected from the patch menu. This window is used for viewing the software update log that...

  • Page 169: Download The Log

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 145 download log, view, print contents download the log 1. Click download log to open the alert box containing a message on how to download the log file to your worksta- tion, if u...

  • Page 170

    G lobal a dministrator s ection c hapter 1: s ystem screen 146 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3. Find the folder in which to save the file, and then enter the file name, retaining the “.Zip” file extension. Click save to begin downloading the zip file to your worksta- t...

  • Page 171: View The Contents of The Log

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 147 view the contents of the log once the software update log file has been downloaded to your workstation, you can view its contents. 1. Find the log file in the folder, and right...

  • Page 172

    G lobal a dministrator s ection c hapter 1: s ystem screen 148 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3. If using winzip, click i agree to open the window containing the zip file: fig. 2:1-54 winzip window 4. Right-click the zip file to open the pop-up menu, and choose “view” t...

  • Page 173

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 149 5. Select “internal ascii text viewer”, and then click view to open the view window containing the log file contents: fig. 2:1-56 view window save, print the log file contents ...

  • Page 174: Synchronization

    G lobal a dministrator s ection c hapter 1: s ystem screen 150 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide synchronization by default, the synchronization pop-up menu includes the setup option that lets you specify the r3000 server’s func- tion on the network: whether it will be a s...

  • Page 175

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 151 note: for an overview on synchronization, see chapter 3: synchronizing multiple units, from the introductory section. Warning: this version of synchronization only supports the...

  • Page 176: Setup Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 152 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide setup window the setup window displays when setup is selected from the synchronization menu. This window is used for establishing the function of the r3000, especially if there...

  • Page 177

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 153 using only one r3000 on the network by default, the “stand alone” mode is selected in the mode frame. This indicates that all settings on the r3000 server that is currently bei...

  • Page 178

    G lobal a dministrator s ection c hapter 1: s ystem screen 154 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide for the source mode setting: 1. In the mode frame, click “source” to display the source mode view: fig. 2:1-59 setup window, source mode 2. At the selective synchronization fie...

  • Page 179

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 155 notes: in order to use the failover detection feature, for each target r3000 server, 8e6 appliance watchdog software release 2.0.00 must first be installed on a separate workst...

  • Page 180

    G lobal a dministrator s ection c hapter 1: s ystem screen 156 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 7. Click add target ip to include this ip address—and corresponding location information, if applicable—in the list box. The following optional steps can be performed: • follow...

  • Page 181

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 157 sync all target servers with the same settings if all target servers have been configured and now need to be set with the same settings, click sync all from the source server. ...

  • Page 182

    G lobal a dministrator s ection c hapter 1: s ystem screen 158 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide set up an r3000 to be a target server an r3000 configured to be a target server will receive profile/library setting changes from the source server only. Warning: if an r3000 s...

  • Page 183

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 159 2. In the source ip frame, enter the source ip address to use for sending profile/library setting changes to this server being configured. Note: if a source server is set up wi...

  • Page 184: Status Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 160 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide status window the status window displays when status is selected from the synchronization menu. This menu selection is available only if this server currently being configured ...

  • Page 185

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 161 view the sync status of targets from the source if the server is set up in the source mode, the r3000 system time displays at the top of the target(s) status frame. This is the...

  • Page 186: View Items In The Queue

    G lobal a dministrator s ection c hapter 1: s ystem screen 162 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view items in the queue if a “fault” message displays in the sync status column for a target server, items still remain in the queue, waiting to be synced. To view items in the...

  • Page 187

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 163 view items previously synced to the server to view items previously synced to a specified target server: 1. In the history column for that server, click details to open the his...

  • Page 188

    G lobal a dministrator s ection c hapter 1: s ystem screen 164 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view the sync status of the target server if the server is set up in the target mode, the r3000 system time displays above the target sync status frame. This is the current dat...

  • Page 189

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 165 • last successful sync - the date and time of the last successful synchronization displays, using the yyyy/ mm/dd and hh:mm:ss format. • history log - click the details button ...

  • Page 190: Mode

    G lobal a dministrator s ection c hapter 1: s ystem screen 166 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide mode mode includes options for configuring the r3000 to filter the network. Click the mode link to view a menu of sub-topics: operation mode and proxy environment settings. Fig...

  • Page 191: Operation Mode Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 167 operation mode window the operation mode window displays when operation mode is selected from the mode menu. This window is used for specifying the operational mode the r3000 w...

  • Page 192: Set The Operation Mode

    G lobal a dministrator s ection c hapter 1: s ystem screen 168 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide set the operation mode the default mode setting is “invisible”. To change this setting, click the radio button corresponding to “router”, “firewall”, “mobile”, or “icap”—either...

  • Page 193

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 169 invisible option: specify the block page delivery the block page delivery method frame displays if the invis- ible operation mode is selected. Specify the block page delivery m...

  • Page 194

    G lobal a dministrator s ection c hapter 1: s ystem screen 170 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide mobile option: specify the mobile client control the mobile client control frame displays if the mobile oper- ation mode is selected. This option should be used if this r3000 i...

  • Page 195

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 171 can communicate with the icap client. For example: "835nb0-20a5-3e52671" 2. In the uri field, enter the uniform resource identifier that must specify the complete hostname and ...

  • Page 196

    G lobal a dministrator s ection c hapter 1: s ystem screen 172 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide proxy environment settings window the proxy environment settings window displays when proxy environment settings is selected from the mode menu. This window is used for specify...

  • Page 197: Use A Local Proxy Server

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 173 use a local proxy server in the proxy setting frame, the default setting is “off”. To specify that a local proxy server is used in the environment: 1. Click the “on” radio butt...

  • Page 198: Authentication

    G lobal a dministrator s ection c hapter 1: s ystem screen 174 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide authentication authentication includes options for configuring the r3000 to authenticate and re-authenticate users on the network. Click the authentication link to view a menu ...

  • Page 199: Nic Mode

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 175 nic mode nic mode window the nic mode window displays when nic mode is selected from the navigation panel. This window lets you specify the speed for the r3000’s network interf...

  • Page 200: View The Nic Negotiation

    G lobal a dministrator s ection c hapter 1: s ystem screen 176 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view the nic negotiation to verify or correct the negotiation for a nic, click view nic negotiation to open a window containing results from the mii-tool and the ethtool about ...

  • Page 201: Modify The Nic Mode Setting

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 177 modify the nic mode setting warning: if changing the nic mode, be sure the hub/switch to which the r3000 is connected will support the selected nic mode. An incorrect setting m...

  • Page 202: Nic Mode Speeds Chart

    G lobal a dministrator s ection c hapter 1: s ystem screen 178 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide nic mode speeds chart below are charts of nic speeds for various r3000 models: year 2008 models lan1 lan2 r3000 hl platform 10, 100, 1000 10, 100, 1000 r3000 sl platform 10, 10...

  • Page 203: Backup/restore

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 179 backup/restore backup/restore window the backup/restore window displays when backup/ restore is selected from the navigation panel. This window is used for saving configuration...

  • Page 204: Backup Procedures

    G lobal a dministrator s ection c hapter 1: s ystem screen 180 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide for each backup configuration created or uploaded via this window, a row is added to the backup configurations grid in the restore frame. The newly added row includes the follo...

  • Page 205: Perform A Backup

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 181 perform a backup to back up configuration and/or library modifications: 1. In the backup frame, click the configuration and/or library checkbox(es) as appropriate. 2. Click bac...

  • Page 206: Download A File

    G lobal a dministrator s ection c hapter 1: s ystem screen 182 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide download a file to download a file to your machine: 1. Select the file from the backup configurations grid. 2. Click download to open the alert box containing a message on how ...

  • Page 207

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 183 after the file has completely downloaded, the download complete dialog box opens: fig. 2:1-75 download complete box you can now open this file, open the folder where the file w...

  • Page 208: Perform A Restoration

    G lobal a dministrator s ection c hapter 1: s ystem screen 184 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide perform a restoration to restore backup data to the server, the backup file must be listed in the backup configurations grid, and the restoration function must be executed. If ...

  • Page 209

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 185 2. Click browse to open the choose file window: fig. 2:1-77 choose file window 3. Select the file to be uploaded. After the file is selected, the choose file window closes. 4. ...

  • Page 210: Remove A Backup File

    G lobal a dministrator s ection c hapter 1: s ystem screen 186 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide remove a backup file to remove a file from the backup configurations grid: 1. Select the file. 2. Click delete. View backup and restoration details to view details on backup an...

  • Page 211: Reset

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 187 reset reset window the reset window displays when reset is selected from the navigation panel. This window is used for resetting the server back to the default settings when th...

  • Page 212

    G lobal a dministrator s ection c hapter 1: s ystem screen 188 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide radius authentication settings radius authentication settings window the radius authentication settings window displays when radius authentication settings is selected from the...

  • Page 213: Enable Radius

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 189 the radius feature uses an external radius accounting server that determines which accounts will be filtered and how they will be filtered. The user profile in the radius accou...

  • Page 214: Apply Settings

    G lobal a dministrator s ection c hapter 1: s ystem screen 190 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 4. In the forward mode field, specify whether accounting request packets will be delivered from the client (nas or proxy server) to the radius accounting server. To enable the ...

  • Page 215: Disable Radius

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 191 disable radius to disable the radius feature: 1. At the radius mode field, click the “off” radio button. 2. Click apply..

  • Page 216: Snmp

    G lobal a dministrator s ection c hapter 1: s ystem screen 192 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide snmp snmp window the snmp window displays when snmp is selected from the navigation panel. This feature lets the global adminis- trator use a third party simple network managem...

  • Page 217: Enable Snmp

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 193 enable snmp the monitoring mode is “off” by default. To enable snmp, click enable in the monitoring mode frame. As a result, all elements in this window become activated. Speci...

  • Page 218: Hardware Failure Detection

    G lobal a dministrator s ection c hapter 1: s ystem screen 194 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide hardware failure detection hardware failure detection window if using an r3000 h, sl, or hl unit, the hardware failure detection window displays when hardware failure detec- ti...

  • Page 219

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 195 view the status of the hard drives the hardware failure detection window displays the current raid array status for the two hard drives (hd 1, hd 2). If both hard drives are fu...

  • Page 220: X Strikes Blocking

    G lobal a dministrator s ection c hapter 1: s ystem screen 196 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide x strikes blocking x strikes blocking window the x strikes blocking window displays when x strikes blocking is selected from the navigation panel. This feature lets a global ad...

  • Page 221: Configuration

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 197 notes: the x strikes blocking topic does not display if the synchronization feature is used, and this server being configured is set up in the target mode to synchronize both p...

  • Page 222: Reset All Workstations

    G lobal a dministrator s ection c hapter 1: s ystem screen 198 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide if “defined” is selected, enter the number of minutes in the text box. The default setting is 5. 6. Specify a redirect url to be used when the end user is locked out from his/h...

  • Page 223: Lock Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 199 lock page a user who receives the final strike that locks him/her out the workstation will see the following lock page display on the screen: fig. 2:1-84 sample lock page the t...

  • Page 224

    G lobal a dministrator s ection c hapter 1: s ystem screen 200 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide “locked” life time field passes, or unless an authorized staff member manually unlocks that user’s workstation (see go to x strikes unlock workstation gui in this section). Ove...

  • Page 225: Email Alert

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 201 • the maximum number of strikes may need to be increased if these configuration settings do not block users often enough • the time span for the maximum number of strikes may n...

  • Page 226: Set Up Email Alert Criteria

    G lobal a dministrator s ection c hapter 1: s ystem screen 202 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide set up email alert criteria 1. In the minutes past midnight before starting time interval (0-59) field, enter the number of minutes past midnight that a locked workstation emai...

  • Page 227

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 203 set up email alert recipients 1. Enter the email address of an individual who will receive locked workstation email alerts. 2. Click add to include the email address in the cur...

  • Page 228: Logon Accounts

    G lobal a dministrator s ection c hapter 1: s ystem screen 204 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide logon accounts click the logon accounts tab to display logon accounts: fig. 2:1-87 x strikes blocking window, logon accounts tab set up users authorized to unlock workstations ...

  • Page 229: Delete A Logon Account

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 205 note: when an authorized staff member is added to this list, that username is automatically added to the current un-accessible users list box in the logon accounts tab of the r...

  • Page 230: Categories

    G lobal a dministrator s ection c hapter 1: s ystem screen 206 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide categories click the categories tab to display categories: fig. 2:1-88 x strikes blocking window, categories tab set up categories to receive strikes or no strikes 1. Select li...

  • Page 231: Re-Login Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 207 go to x strikes unlock workstation gui when the global administrator clicks go to x strikes unlock workstation gui, either the re-login window or the x strikes unlock workstati...

  • Page 232: X Strikes Unlock Workstation

    G lobal a dministrator s ection c hapter 1: s ystem screen 208 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide x strikes unlock workstation the following information displays in the x strikes unlock workstation pop-up window: ip address, user name, and expire date/time of currently lock...

  • Page 233: Close The Pop-Up Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 209 set up an email address to receive alerts to send locked workstation information to a designated administrator: 1. Enter the email address in the email address to be subscribed...

  • Page 234: Warn Option Setting

    G lobal a dministrator s ection c hapter 1: s ystem screen 210 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide warn option setting warn option setting window the warn option setting window displays when warn option setting is selected from the navigation panel. This feature lets a globa...

  • Page 235

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 211 notes: if using the synchronization feature, the warn option setting window is available in the stand alone and source mode. This topic does not display if this server being co...

  • Page 236: Customization

    G lobal a dministrator s ection c hapter 1: s ystem screen 212 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide customization customization includes options to customize settings for html pages that display for end users who execute a command that triggers the associated pop-up window to...

  • Page 237: Common Customization Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 213 common customization window the common customization window displays when common customization is selected from the customization menu. This window is used for specifying eleme...

  • Page 238: Enable, Disable Features

    G lobal a dministrator s ection c hapter 1: s ystem screen 214 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide enable, disable features 1. Click “on” or “off” to enable or disable the following elements in the html pages, and make entries in fields to display customized text, if necessa...

  • Page 239

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 215 • help link url - by default, http://www.8e6.Com/tech- support/deniedresponse.Html displays as the help link url. Enter the url to be used when the end user clicks the help lin...

  • Page 240

    G lobal a dministrator s ection c hapter 1: s ystem screen 216 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide lock page customization window the lock page customization displays when lock page is selected from the customization menu. This window is used with the x strikes blocking feat...

  • Page 241: Edit Entries, Setting

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 217 edit entries, setting 1. Make an entry in any of the following fields: • in the header field, enter a static header to be displayed at the top of the lock page. • in the descri...

  • Page 242: Preview Sample Lock Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 218 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide preview sample lock page 1. Click preview to launch a separate browser window containing a sample customized lock page, based on entries saved in this window and in the common ...

  • Page 243

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 219 • 8e6 technologies - clicking this link takes the user to 8e6’s web site. 2. Click the “x” in the upper right corner of the window to close the sample customized lock page. Tip...

  • Page 244: Add, Edit Entries

    G lobal a dministrator s ection c hapter 1: s ystem screen 220 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: see appendix c: create a custom block page for infor- mation on creating a customized block page using your own design. Tip: an entry in any of the fields in this window ...

  • Page 245: Preview Sample Block Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 221 preview sample block page 1. Click preview to launch a separate browser window containing a sample customized block page, based on entries saved in this window and in the commo...

  • Page 246

    G lobal a dministrator s ection c hapter 1: s ystem screen 222 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide by default, the following standard links are included in the block page: • help - clicking this link takes the user to 8e6’s tech- nical support page that explains why access t...

  • Page 247

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 223 warn page customization window the warn page customization window displays when warn page is selected from the customization menu. This window is used with the warn option sett...

  • Page 248: Add, Edit Entries

    G lobal a dministrator s ection c hapter 1: s ystem screen 224 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add, edit entries 1. Make an entry in any of the following fields: • in the header field, enter a static header to be displayed at the top of the warning page. • in the descrip...

  • Page 249: Preview Sample Warning Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 225 preview sample warning page 1. Click preview to launch a separate browser window containing a sample customized warning page, based on entries saved in this window and in the c...

  • Page 250

    G lobal a dministrator s ection c hapter 1: s ystem screen 226 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide by default, the following standard links are included in the warning page: • help - clicking this link takes the user to 8e6’s tech- nical support page that explains why access...

  • Page 251

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 227 2. Click the “x” in the upper right corner of the window to close the sample customized warning page. Tip: if necessary, make edits in the warn page customization window or the...

  • Page 252: Profile Control Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 228 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide profile control window the profile control window displays when profile control is selected from the customization menu. This window is used with the override account feature, ...

  • Page 253: Edit Entries

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 229 edit entries 1. Make an entry in any of the following fields: • in the header field, enter a static header to be displayed at the top of the profile control pop-up window. • in...

  • Page 254

    G lobal a dministrator s ection c hapter 1: s ystem screen 230 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide quota block page customization window the quota block page customization window displays when quota block page is selected from the customization menu. This window is used for ...

  • Page 255: Add, Edit Entries

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 231 add, edit entries 1. Make an entry in any of the following fields: • in the header field, enter a static header to display at the top of the quota block page. • in the descript...

  • Page 256

    G lobal a dministrator s ection c hapter 1: s ystem screen 232 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide preview sample quota block page 1. Click preview to launch a separate browser window containing a sample customized quota block page, based on entries saved in this window and ...

  • Page 257

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 233 • 8e6 technologies - clicking this link takes the user to 8e6’s web site. 2. Click the “x” in the upper right corner of the window to close the sample customized quota block pa...

  • Page 258: Add, Edit Entries

    G lobal a dministrator s ection c hapter 1: s ystem screen 234 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide tip: an entry in any of the fields in this window is optional. Note: for more information about quotas, see the quota setting window in this chapter. Add, edit entries 1. Make ...

  • Page 259

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 235 preview sample quota notice page 1. Click preview to launch a separate browser window containing a sample customized quota notice page, based on entries saved in this window an...

  • Page 260

    G lobal a dministrator s ection c hapter 1: s ystem screen 236 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • help - clicking this link takes the user to 8e6’s tech- nical support page that explains why access to the site or service may have been denied. • 8e6 technologies - clicking...

  • Page 261: Cmc Management

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 237 cmc management cmc management displays on an r3000 set up in the source mode, and includes centralized management console options for viewing the filtering statuses of this sou...

  • Page 262: Patch Management Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 238 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide patch management window the patch management window displays when patch management is selected from the cmc management menu. This window is used for viewing software updates cu...

  • Page 263

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 239 view software update information the patches frame displays the software update statuses of the source and each target r3000: hostname/location (information entered in the lan ...

  • Page 264

    G lobal a dministrator s ection c hapter 1: s ystem screen 240 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide apply or undo a software update to apply a software update: 1. Click to select the row(s) corresponding to the servers to be updated. 2. Click apply. Notes: if the source serve...

  • Page 265: Status Window

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 241 status window the status window displays when status is selected from the cmc management menu. This window is used for viewing the filtering status of the source and target ser...

  • Page 266

    G lobal a dministrator s ection c hapter 1: s ystem screen 242 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view filtering status information the status frame displays the following columns of informa- tion: • hostname/location - criteria entered in the lan settings window for the so...

  • Page 267: Quota Setting

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 243 quota setting quota setting window the quota setting window displays when quota setting is selected from the navigation panel. This window lets a global administrator configure...

  • Page 268: Configure Quota Hit Settings

    G lobal a dministrator s ection c hapter 1: s ystem screen 244 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide configure quota hit settings 1. Enter the number of seconds per hit to indicate how much time will be applied towards a “hit” (url access) in any category with a quota. The def...

  • Page 269: Reset Quotas

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 245 reset quotas quotas are automatically reset at midnight, but also can be manually reset on demand or scheduled to be reset at specific times each day. Reset quotas now click re...

  • Page 270

    G lobal a dministrator s ection c hapter 1: s ystem screen 246 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide delete a quota reset time from the schedule 1. Select the quota reset time from the current reset time(s) list box. 2. Click remove to remove the quota reset time from the list...

  • Page 271: Quota Notice Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 247 quota notice page when the end user has spent 75 percent of time in a quota- restricted library group/category, the quota notice page displays: fig. 2:1-109 sample quota notice...

  • Page 272: Quota Block Page

    G lobal a dministrator s ection c hapter 1: s ystem screen 248 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • help - clicking this link takes the user to 8e6’s technical support page that explains why access to the site may have been denied. • 8e6 technologies - clicking this link ta...

  • Page 273

    G lobal a dministrator s ection c hapter 1: s ystem screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 249 by default, the following fields display: • category field - the name of the library category that triggered the quota block page displays. • requested url field - the url the ...

  • Page 274: Chapter 2: Group Screen

    G lobal a dministrator s ection c hapter 2: g roup screen 250 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 2: group screen the group screen is comprised of windows and dialog boxes used for adding ip groups and/or nt/ldap domains, and for creating filtering profiles for ip/nt...

  • Page 275

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 251 the navigation panel at the left of the screen contains a hier- archical list of groups set up in a tree format. At the root of this tree is group. The main branches of this tre...

  • Page 276: Global Group

    G lobal a dministrator s ection c hapter 2: g roup screen 252 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide global group global group includes options for creating and maintaining groups. Click the global group link to view a menu of sub- topics: range to detect, rules, global group p...

  • Page 277: Range to Detect Window

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 253 range to detect window the range to detect window displays when range to detect is selected from the global group menu. This window is used for defining segments of network traf...

  • Page 278: Add A Segment to The Network

    G lobal a dministrator s ection c hapter 2: g roup screen 254 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: if this r3000 is using the source mode and the upstream failover detect feature is enabled, if a downstream target server fails—as detected by the 8e6 appliance watchdog—t...

  • Page 279

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 255 2. Click one of the following buttons to select the procedure for adding the segment: • start the setup wizard - clicking this button takes you to the range to detect setup wiza...

  • Page 280: Range to Detect Setup Wizard

    G lobal a dministrator s ection c hapter 2: g roup screen 256 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide range to detect setup wizard click the start the setup wizard button to display step 1 of the range to detect setup wizard. The wizard is comprised of six steps. An entry is req...

  • Page 281

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 257 • ip / netmask - use these fields to specify a range of ip addresses • individual ip - use this field to enter a single ip address 2. Click add to include the segment in the lis...

  • Page 282

    G lobal a dministrator s ection c hapter 2: g roup screen 258 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide step 2: optional in this step you define the destination ip address(es) to be filtered. Note: by making entries in destination ip fields, traffic will be restricted to the range...

  • Page 283

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 259 step 3: optional in this step you define the source ip address(es) to be excluded from filtering. Fig. 2:2-7 range to detect setup wizard window, step 3.

  • Page 284

    G lobal a dministrator s ection c hapter 2: g roup screen 260 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide step 4: optional in this step you define the destination ip address(es) to be excluded from filtering. Any entries from the list box in step 1 automatically display in the list ...

  • Page 285

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 261 step 5: optional in this step you enter destination port numbers to be excluded from filtering. Fig. 2:2-9 range to detect setup wizard window, step 5 1. In the individual port ...

  • Page 286

    G lobal a dministrator s ection c hapter 2: g roup screen 262 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide step 6 in this final step of the wizard you review your entries and make modifications, if necessary. Fig. 2:2-10 range to detect setup wizard window, step 6 1. Review the conte...

  • Page 287

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 263 range to detect advanced settings click the advanced settings button to display the range to detect advanced settings window: fig. 2:2-11 range to detect advanced settings windo...

  • Page 288

    G lobal a dministrator s ection c hapter 2: g roup screen 264 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide modify a segment of the network to modify a segment: 1. In the main range to detect settings window (see fig. 2:2-3), select the segment from the current ranges list box. 2. Cli...

  • Page 289: Rules Window

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 265 rules window the rules window displays when rules is selected from the global group menu. This window is used for adding a filtering rule when creating a filtering profile for a...

  • Page 290: View Criteria For A Rule

    G lobal a dministrator s ection c hapter 2: g roup screen 266 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view criteria for a rule select the rule from the current rules pull-down menu to populate the rule details frame with settings made for that rule. If this rule is not an 8e6 pr...

  • Page 291

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 267 note: if a category group does not display any filter setting (i.E. The check mark does not display in any column for the category group), one or more library categories within ...

  • Page 292: Modify A Rule

    G lobal a dministrator s ection c hapter 2: g roup screen 268 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • the overall quota field becomes enabled if a quota is entered for any library group/category. By default, the enabled overall quota is turned “off”. If turned “on”, enter the ...

  • Page 293: Remove A Rule

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 269 5. Click save rule. Remove a rule to delete a rule: 1. Select the rule from the current rules pull-down menu. 2. Click delete rule..

  • Page 294: Global Group Profile Window

    G lobal a dministrator s ection c hapter 2: g roup screen 270 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide global group profile window the global group profile window displays when global group profile is selected from the global group menu. This window is used for viewing/creating t...

  • Page 295: Category Profile

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 271 category profile category profile displays by default when global group profile is selected from the global group menu, or when the category tab is clicked. This tab is used for...

  • Page 296

    G lobal a dministrator s ection c hapter 2: g roup screen 272 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • block - urls in this category will be blocked. Note: if a category group does not display any filter setting (i.E. The check mark does not display in any column for the catego...

  • Page 297

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 273 note: see the quota settings window in chapter 1: system screen for more information on configuring quota settings and resetting quotas for end users currently blocked by quotas...

  • Page 298: Port

    G lobal a dministrator s ection c hapter 2: g roup screen 274 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide port port displays when the port tab is clicked. This tab is used for blocking access to specified ports for the global filtering profile. Fig. 2:2-14 global group profile windo...

  • Page 299: Default Redirect Url

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 275 2. Click remove. 3. Click apply to apply your settings at the global level. Default redirect url default redirect url displays when the default redirect url tab is clicked. This...

  • Page 300: Filter Options

    G lobal a dministrator s ection c hapter 2: g roup screen 276 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 2. Click apply to apply your settings. Filter options filter options displays when the filter options tab is clicked. This tab is used for specifying which filter option(s) will...

  • Page 301

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 277 x strikes blocking with the x strikes blocking option enabled, an end user who attempts to access inappropriate sites on the internet will be locked out from his/her workstation...

  • Page 302

    G lobal a dministrator s ection c hapter 2: g roup screen 278 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide search engine keyword filter control with the search engine keyword filter control option enabled, search engine keywords can be set up to be blocked. When a user enters a keywo...

  • Page 303

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 279 url keyword filter control with the url keyword filter control option enabled, url keywords can be set up to be blocked. When a user enters a keyword in the address line of a br...

  • Page 304: Override Account Window

    G lobal a dministrator s ection c hapter 2: g roup screen 280 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide override account window the override account window displays when override account is selected from the global group menu. This window is used for creating an override account t...

  • Page 305: Add An Override Account

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 281 notes: a user can have only one override account. If an over- ride account was previously created for a user in a master ip group, only that override account will be effective, ...

  • Page 306: Category Profile

    G lobal a dministrator s ection c hapter 2: g roup screen 282 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide category profile the rule tab is used for creating the categories portion of the override account profile. Fig. 2:2-18 override account pop-up window, rule tab to create the cat...

  • Page 307

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 283 note: if a category group does not display any filter setting (i.E. The check mark does not display in any column for the category group), one or more library categories within ...

  • Page 308

    G lobal a dministrator s ection c hapter 2: g roup screen 284 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • in the quota column, enter the number of minutes the user will be able to access the library group/category. The minimum number of minutes is “1” and the maximum is “1439” (on...

  • Page 309: Redirect Url

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 285 redirect url the redirect tab is used for specifying the url to be used for redirecting the user if he/she attempts to access a site or service set up to be blocked. Fig. 2:2-19...

  • Page 310: Filter Options

    G lobal a dministrator s ection c hapter 2: g roup screen 286 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3. Click the filter options tab to continue creating the over- ride account profile, or click close to close the pop-up window and to return to the override account window. Filt...

  • Page 311

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 287 note: see the x strikes blocking window in chapter 1: system screen for information on setting up the x strikes blocking feature. • “google/yahoo!/ask.Com/aol safe search enforc...

  • Page 312

    G lobal a dministrator s ection c hapter 2: g roup screen 288 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: to set up search engine keywords in a search engine keywords window, see the following sections of this user guide for the specified library type: • 8e6 supplied categorie...

  • Page 313: Edit An Override Account

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 289 edit an override account change the password to change an override account’s password: 1. In the current accounts frame, select the username from the list box. 2. In the account...

  • Page 314: Delete An Override Account

    G lobal a dministrator s ection c hapter 2: g roup screen 290 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide delete an override account to delete an override account: 1. In the current accounts frame, select the username from the list box. 2. Click remove. Minimum filtering level windo...

  • Page 315

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 291 fig. 2:2-21 minimum filtering level window, min. Filtering categories by default, “child pornography” and “pornography/adult content” are assigned a block filter setting, and al...

  • Page 316

    G lobal a dministrator s ection c hapter 2: g roup screen 292 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide create, edit minimum filtering categories to create the categories portion of the minimum filtering level profile: 1. Double-click the column (pass, block) in the row corre- spo...

  • Page 317: Port

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 293 port port displays when the port tab is clicked. This tab is used for blocking access to specified ports at the minimum filtering level. Fig. 2:2-22 minimum filtering level wind...

  • Page 318

    G lobal a dministrator s ection c hapter 2: g roup screen 294 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 1. Select the port number. 2. Click remove. 3. Click apply to apply your settings at the minimum filtering level. Minimum filtering bypass options minimum filtering bypass optio...

  • Page 319

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 295 specify minimum filtering bypass options to allow a user to override settings made at the minimum filtering level: 1. In the override account frame, click the “on” checkbox. Any...

  • Page 320: Refresh All

    G lobal a dministrator s ection c hapter 2: g roup screen 296 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide refresh all refresh all main branches from the global group menu, click refresh all to refresh the main branches of the tree. This action should be performed whenever authentica...

  • Page 321

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 297 ip ip includes options for adding a master ip group and to refresh the tree list. Click the ip link to view a menu of sub- topics: add group, and refresh. Fig. 2:2-24 group scre...

  • Page 322: Add Group

    G lobal a dministrator s ection c hapter 2: g roup screen 298 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add group add a master ip group from the ip group menu: 1. Choose add group to open the create new group dialog box: fig. 2:2-25 create new group box 2. Enter up to 20 character...

  • Page 323: Refresh

    G lobal a dministrator s ection c hapter 2: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 299 4. Click ok to add the group to the tree. Note: information on defining the group and its members and establishing their filtering profiles can be found in the group administrat...

  • Page 324: Chapter 3: Library Screen

    G lobal a dministrator s ection c hapter 3: l ibrary screen 300 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 3: library screen the library screen is comprised of windows and dialog boxes used for adding and maintaining library categories. Library categories are used when crea...

  • Page 325

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 301 click library lookup, customer feedback module, cate- gory weight system, or nntp newsgroup to select that topic. To view the list of category groups, double-click category gr...

  • Page 326: Updates

    G lobal a dministrator s ection c hapter 3: l ibrary screen 302 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide updates updates includes options for making configurations for library category activities. Click the updates link to view a menu of sub-topics: configuration, manual update, ...

  • Page 327: Configuration Window

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 303 configuration window the configuration window displays when configuration is selected from the updates menu. This window is used for making settings to allow the r3000 to rece...

  • Page 328: Select The Log Level

    G lobal a dministrator s ection c hapter 3: l ibrary screen 304 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide optional: specify a proxy server 1. In the ftp proxy setting frame, by default “disable” is selected. Click “enable” if the server is in a proxy server environment. This selec...

  • Page 329: Manual Update Window

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 305 manual update window the manual update to 8e6 supplied categories window displays when manual update is selected from the updates menu. This window is used for updating specif...

  • Page 330

    G lobal a dministrator s ection c hapter 3: l ibrary screen 306 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide specify the type of on demand update 1. Choose from the following service options by clicking the corresponding radio button: • weekly update - select this option to update ur...

  • Page 331: Select Additional Languages

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 307 additional language support window the additional language support window displays when additional language support is selected from the updates menu. This window is used for ...

  • Page 332

    G lobal a dministrator s ection c hapter 3: l ibrary screen 308 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide to make an optional selection for a primary language, choose the language from the (optional) select primary language pull-down menu. Tip: to move a language selection back to...

  • Page 333: Library Update Log Window

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 309 library update log window the library update log window displays when library update log is selected from the updates menu. This window is used for viewing transfer activity o...

  • Page 334: Download The Log

    G lobal a dministrator s ection c hapter 3: l ibrary screen 310 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide download log, view, print contents download the log 1. Click download log to open the alert box containing a message on how to download the log file to your worksta- tion, if ...

  • Page 335: View The Contents of The Log

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 311 3. Find the folder in which to save the file, and then enter the file name, retaining the “.Zip” file extension. Click save to begin downloading the zip file to your worksta- ...

  • Page 336

    G lobal a dministrator s ection c hapter 3: l ibrary screen 312 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide fig. 2:3-10 folder containing downloaded file 2. Choose “open with” and then select a zip file executable program such as “winzip executable” to launch that application: fig. ...

  • Page 337

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 313 fig. 2:3-12 winzip window 4. Right-click the zip file to open the pop-up menu, and choose “view” to open the view dialog box: fig. 2:2-13 view dialog box 5. Select “internal a...

  • Page 338

    G lobal a dministrator s ection c hapter 3: l ibrary screen 314 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide save, print the log file contents with the log file displaying correctly formatted in winzip’s view window, if you wish to save or print the contents of this file: 1. Click cl...

  • Page 339: Emergency Update Log Window

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 315 emergency update log window the emergency update log window displays when emer- gency update log is selected from the updates menu. This window is used for viewing transfer ac...

  • Page 340

    G lobal a dministrator s ection c hapter 3: l ibrary screen 316 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide download the software update log file note: see library update log window for screen shots pertaining to downloading the software update log file. 1. Click download log to ope...

  • Page 341: Library Lookup

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 317 library lookup library lookup window the library lookup window displays when library lookup is selected from the navigation panel. This window is used for verifying whether a ...

  • Page 342: Url Lookup, Removal

    G lobal a dministrator s ection c hapter 3: l ibrary screen 318 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide url lookup, removal perform a url check to see if a url has been included in the library: 1. In the url lookup frame, enter the url. For example, enter http://www.Coors.Com, c...

  • Page 343: Remove A Url

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 319 remove a url to remove the url: 1. Select the item from the result category list box. 2. Click remove. Submit an email to the administrator if using a non-web based email clie...

  • Page 344: Reload The Library

    G lobal a dministrator s ection c hapter 3: l ibrary screen 320 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide search engine keyword lookup, removal perform a search engine keyword check to see if a search engine keyword or keyword phrase has been included in any library category: 1. I...

  • Page 345: Customer Feedback Module

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 321 customer feedback module customer feedback module window the customer feedback module window displays when customer feedback module is selected from the navigation panel. This...

  • Page 346

    G lobal a dministrator s ection c hapter 3: l ibrary screen 322 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide disable customer feedback module 1. At the customer feedback module - auto learning feature field, click “off” to indicate that you wish to disable the customer feedback modul...

  • Page 347

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 323 selective web request data or internet usage information to 8e6 technologies’ server for statistical analysis. 8e6 technologies may gather information relating to types of sit...

  • Page 348

    G lobal a dministrator s ection c hapter 3: l ibrary screen 324 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 4. After reading this text, if you agree with the terms, click in the checkbox to activate the accept button. 5. Click accept to close the disclaimer box and to open the note ...

  • Page 349: Category Weight System

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 325 category weight system category weight system window the category weight system window displays when cate- gory weight system is selected from the navigation panel. This featu...

  • Page 350: View The Current Selections

    G lobal a dministrator s ection c hapter 3: l ibrary screen 326 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view the current selections this window contains two list boxes: • “no weight” categories - populated with 8e6 supplied categories • “weight” categories - pre-populated by def...

  • Page 351: Weighting Library Categories

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 327 weighting library categories 1. Select the category from the "no weight" categories list box. Tip: multiple categories can be selected by clicking each cate- gory while pressi...

  • Page 352: Nntp Newsgroup

    G lobal a dministrator s ection c hapter 3: l ibrary screen 328 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide nntp newsgroup nntp newsgroup window the nntp newsgroup window displays when nntp news- group is selected from the navigation panel. This window is used for adding or removing...

  • Page 353

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 329 remove a newsgroup from the library to remove a newsgroup from the library: 1. In the newsgroup frame, enter the newsgroup address. 2. Click remove. After all changes have bee...

  • Page 354: Category Groups

    G lobal a dministrator s ection c hapter 3: l ibrary screen 330 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide category groups category groups is represented by a tree of library category groups, with each group comprised of 8e6 supplied library categories. 8e6 supplied library categor...

  • Page 355

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 331 double-click category groups to open the tree and to display category groups. Double-click a category group’s envelope to open that segment of the tree and to view library cat...

  • Page 356: Library Details Window

    G lobal a dministrator s ection c hapter 3: l ibrary screen 332 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide library details window the library details window displays when library details is selected from the library category’s menu of sub-topics. This window is a view only window. ...

  • Page 357: Urls Window

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 333 urls window the urls window displays when urls is selected from the library category’s menu of sub-topics. This window is used for viewing, or adding and/or removing a url fro...

  • Page 358

    G lobal a dministrator s ection c hapter 3: l ibrary screen 334 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view a list of urls in the library category to view a list of all urls that either have been added or deleted: 1. Click the view tab. 2. Make a selection from the pull-down me...

  • Page 359

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 335 add or remove urls, reload the library the action tab is used for making entries in the urls window for adding or removing a url, or reloading the library. Add a url to the li...

  • Page 360

    G lobal a dministrator s ection c hapter 3: l ibrary screen 336 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add a wildcard url to the library category note: wildcards are to be used for blocking only. They are not designed to be used for the exceptions function or the always allowed...

  • Page 361: Reload The Library

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 337 remove a url from the library category to remove a url or wildcard url from the library category: 1. Click the action tab. 2. Enter the url in the edit url list frame or edit ...

  • Page 362: Url Keywords Window

    G lobal a dministrator s ection c hapter 3: l ibrary screen 338 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide url keywords window the url keywords window displays when url keywords is selected from the library category’s menu of sub-topics. This window is used for adding and removing ...

  • Page 363: View A List of Url Keywords

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 339 warning: use extreme caution when setting up url keywords for filtering. If a keyword contains the same consecutive charac- ters as a keyword set up to be blocked, users will ...

  • Page 364

    G lobal a dministrator s ection c hapter 3: l ibrary screen 340 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide upload a list of url keywords to the library before uploading a text file with url keyword additions or deletions, in the upload url keyword file frame, specify whether the co...

  • Page 365: Reload The Library

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 341 upload a list of url keyword deletions to upload a text file with url keyword deletions: 1. Click upload to deletion file to open the upload library keyword pop-up window (see...

  • Page 366

    G lobal a dministrator s ection c hapter 3: l ibrary screen 342 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide search engine keywords window the search engine keywords window displays when search engine keywords is selected from the library cate- gory’s menu of sub-topics. This window ...

  • Page 367

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 343 note: if the feature for search engine keyword filtering is not enabled in a filtering profile, search engine keywords can be added in this window but search engine keyword fi...

  • Page 368

    G lobal a dministrator s ection c hapter 3: l ibrary screen 344 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide remove a search engine keyword from the library to remove a search engine keyword/phrase from the library category: 1. In the edit search keyword list frame, enter up to 75 al...

  • Page 369: Reload The Library

    G lobal a dministrator s ection c hapter 3: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 345 upload a list of search engine keyword deletions to upload a text file with search engine keyword/phrase deletions: 1. Click upload to deletion to open the upload library keyw...

  • Page 370: Chapter 4: Reporting Screen

    G lobal a dministrator s ection c hapter 4: r eporting screen 346 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 4: reporting screen the reporting screen contains options for transferring and/ or reviewing internet usage data collected by the r3000. Fig. 2:4-1 reporting screen ...

  • Page 371

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 347 note: information on configuring the enterprise reporter (er) to work with the r3000 can be found in appendix f of the appen- dices section. Warning: a version of the enterp...

  • Page 372: Report Configuration

    G lobal a dministrator s ection c hapter 4: r eporting screen 348 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide report configuration report configuration window the report configuration window displays when report configuration is selected from the navigation panel. This window is use...

  • Page 373: 8E6 Enterprise Reporter

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 349 2. Click save. 8e6 enterprise reporter if “8e6 enterprise reporter” was selected, the 8e6 enter- prise reporter tab displays by default. On this tab, you need to specify cri...

  • Page 374: Execute Log Transfer Now

    G lobal a dministrator s ection c hapter 4: r eporting screen 350 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide to remove an ip address from the list box: 1. Select the ip address. 2. Click remove. Execute log transfer now in the initiating log transfer frame, click initiate to transf...

  • Page 375: Other Device

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 351 2. Click view log to view up to the last 300 lines of transfer activity in the view log frame. Other device if “other device” was selected, the other device tab displays by ...

  • Page 376

    G lobal a dministrator s ection c hapter 4: r eporting screen 352 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3. At the user authentication field, “user” is selected by default, indicating that a username and password will be required for ftp transfers. Click the “anonymous” radio b...

  • Page 377

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 353 view transfer activity to the reporting device after logs have been transferred from the r3000 to the reporting device, the log tab can be clicked to view transfer activity....

  • Page 378: Real Time Probe

    G lobal a dministrator s ection c hapter 4: r eporting screen 354 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide real time probe real time probe window the real time probe window displays when real time probe is selected from the navigation panel. This feature lets the probe administra...

  • Page 379: Configuration

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 355 configuration enable real time probes 1. On the configuration tab, click “on”. 2. Click save to enable the real time probes feature. As a result, all elements in this window...

  • Page 380: Report Recipients

    G lobal a dministrator s ection c hapter 4: r eporting screen 356 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide remove ips from the white list 1. Select the ip address(es) from the current white list of ips list box. 2. Click delete to remove the ip address(es) from the white list. Re...

  • Page 381: Remove Email Addresses

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 357 2. Select the maximum file size of an email report (mb) that can be sent, from 1mb increments up to 20mb. The default is 5 mb. 3. Click save. Set up email addresses to recei...

  • Page 382: Logon Accounts

    G lobal a dministrator s ection c hapter 4: r eporting screen 358 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide logon accounts click the logon accounts tab to display logon accounts: fig. 2:4-8 real time probe window, logon accounts tab set up users authorized to create probes 1. Ente...

  • Page 383: Delete A Logon Account

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 359 note: when an authorized staff member is added to this list, that username is automatically added to the current un-accessible users list box in the logon accounts tab of th...

  • Page 384: Re-Login Window

    G lobal a dministrator s ection c hapter 4: r eporting screen 360 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide go to real time probe reports gui when the global administrator clicks go to real time probe reports gui, either the re-login window or the real time probe reports pop-up wi...

  • Page 385: Real Time Probe Reports

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 361 real time probe reports the real time probe reports window is comprised of the view and create tabs. The view tab displays by default (see fig. 2:4-11), showing the global a...

  • Page 386

    G lobal a dministrator s ection c hapter 4: r eporting screen 362 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide the current probe count displays the total number of active probes, and the number of probes created under this account. The maximum probes to run/schedule simultaneously en...

  • Page 387

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 363 • “category”: select the library category to be probed. This selection generates a report with data for the specified library category. Note: up to 250 characters will be ac...

  • Page 388: View Real Time Probe Details

    G lobal a dministrator s ection c hapter 4: r eporting screen 364 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view real time probe details click the view tab to view details about active probes: fig. 2:4-11 real time probe reports, view tab the display name shows the name assigned t...

  • Page 389

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 365 by selecting a probe, buttons for the probe become acti- vated, based on the state of the probe. The following options are available for each of the probe statuses: • comple...

  • Page 390

    G lobal a dministrator s ection c hapter 4: r eporting screen 366 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide keyword if the method is an se keyword or a url keyword); url in libraries, and requested url. The following actions can be performed in this box: • click a url to open a wi...

  • Page 391

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 367 stop, delete options clicking stop halts the probe and gives it a completed status. This option is also available in the real time infor- mation box via the “stop” button. C...

  • Page 392: Shadow Log Format

    G lobal a dministrator s ection c hapter 4: r eporting screen 368 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide shadow log format shadow log format window the shadow log format window displays when shadow log format is selected from the navigation panel. If the r3000's reporting devic...

  • Page 393: Auto-Detect Option

    G lobal a dministrator s ection c hapter 4: r eporting screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 369 specify the shadow log format the window is comprised of the log format frame containing radio buttons corresponding to the following options: “auto-detect”, “post 2.0 log f...

  • Page 394: Post 2.0 Log Format Option

    G lobal a dministrator s ection c hapter 4: r eporting screen 370 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide post 2.0.10 log format option if this r3000 currently has the 2.0.10 or higher software version applied, the post 2.0.10 log format option should be selected, since the er 4...

  • Page 395: Roup

    G roup a dministrator s ection i ntroduction 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 371 g roup a dministrator s ection introduction the group administrator section of this user guide is comprised of two chapters that include information on func- tions performed by the group adm...

  • Page 396: Chapter 1: Group Screen

    G roup a dministrator s ection c hapter 1: g roup screen 372 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide chapter 1: group screen group administrators use group screen windows to add members to a master ip group, create sub-groups and/or individual ip members, and define and maintain...

  • Page 397: Refresh

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 373 click an entity in the tree list to view a menu of topics or actions that can be performed for that entity. Ip refresh refresh the master ip group, member click refresh whenever ...

  • Page 398: Master Ip Group

    G roup a dministrator s ection c hapter 1: g roup screen 374 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide master ip group master ip group includes options for defining and main- taining group accounts, setting up an override account and/ or exception urls to bypass global settings, a...

  • Page 399: Group Details Window

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 375 group details window the group details window displays when group details is selected from the menu. This window is used for viewing the group name and for changing the password ...

  • Page 400: Members Window

    G roup a dministrator s ection c hapter 1: g roup screen 376 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide members window the members window displays when members is selected from the menu. This window is used for adding and managing members of a master ip group. For the invisible and...

  • Page 401

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 377 add the ip address of the member if using the invisible or router mode: 1. Specify whether to add an ip address range with or without a netmask by selecting either “source ip” or...

  • Page 402: Override Account Window

    G roup a dministrator s ection c hapter 1: g roup screen 378 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide override account window the override account window displays when override account is selected from the menu. This window is used for creating an override account that allows an ...

  • Page 403: Add An Override Account

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 379 notes: override accounts can be created for any authorized user. In order for a user with an override account to access cate- gories and ports set up to be blocked at the master ...

  • Page 404: Category Profile

    G roup a dministrator s ection c hapter 1: g roup screen 380 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide category profile the rule tab is used for creating the categories portion of the override account profile. Fig. 3:1-7 override account pop-up window, rule tab to create the categ...

  • Page 405

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 381 note: if a category group does not display any filter setting (i.E. The check mark does not display in any column for the category group), one or more library categories within t...

  • Page 406

    G roup a dministrator s ection c hapter 1: g roup screen 382 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • in the quota column, enter the number of minutes the user will be able to access the library group/category. The minimum number of minutes is “1” and the maximum is “1439” (one...

  • Page 407: Redirect Url

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 383 redirect url the redirect tab is used for specifying the url to be used for redirecting the user if he/she attempts to access a site or service set up to be blocked. Fig. 3:1-8 o...

  • Page 408: Filter Options

    G roup a dministrator s ection c hapter 1: g roup screen 384 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide filter options the filter options tab is used for specifying which filter option(s) will be applied to the override account profile. Fig. 3:1-9 override account pop-up window, fi...

  • Page 409

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 385 • “google/yahoo!/ask.Com/aol safe search enforce- ment” - with the google/yahoo!/ask.Com/aol safe search enforcement option enabled, google, yahoo!, ask.Com, and aol’s “strict” s...

  • Page 410: Edit An Override Account

    G roup a dministrator s ection c hapter 1: g roup screen 386 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: to set up url keywords in a url keywords window, see the url keywords window in chapter 2. Edit an override account change the password to change an override account’s pass...

  • Page 411: Delete An Override Account

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 387 delete an override account to delete an override account: 1. In the current accounts frame, select the username from the list box. 2. Click remove..

  • Page 412: Group Profile Window

    G roup a dministrator s ection c hapter 1: g roup screen 388 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide group profile window the group profile window displays when group profile is selected from the group menu. This window is used for viewing/creating the group’s filtering profile....

  • Page 413

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 389 by default, “rule0 minimum filtering level” displays in the available filter levels pull-down menu, and the minimum filtering level box displays “child pornography” and “pornogra...

  • Page 414

    G roup a dministrator s ection c hapter 1: g roup screen 390 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • allow - urls in this category will be added to the end user’s white list. • warn - urls in this category will warn the end user that the url he/she requested can be accessed, b...

  • Page 415: Redirect Url

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 391 5. Click apply to apply your settings to the override account profile. 6. Click another tab (redirect or filter options) to continue creating the override account profile, or cli...

  • Page 416: Filter Options

    G roup a dministrator s ection c hapter 1: g roup screen 392 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide if “custom url” is selected, enter the redirect url in the corresponding text box. Users will be redirected to the designated page at this url instead of the block page. 2. Click...

  • Page 417

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 393 2. Click apply to apply your settings. X strikes blocking with the x strikes blocking option enabled, an end user who attempts to access inappropriate sites on the internet will ...

  • Page 418

    G roup a dministrator s ection c hapter 1: g roup screen 394 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide engine, if that keyword has been set up to be blocked, the search will not be performed. Search engine keywords are entered in the search engine keywords window of custom library...

  • Page 419: Exception Url Window

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 395 exception url window the exception url window displays when exception url is selected from the group menu. This window is used for blocking group members’ access to specified url...

  • Page 420: Block Url Frame

    G roup a dministrator s ection c hapter 1: g roup screen 396 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide block url frame to block the group’s access to a url: 1. In the block url field, enter the url. 2. Click add to include the url in the block urls list box. To allow the url to be...

  • Page 421: Time Profile Window

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 397 time profile window the time profile window displays when time profile is selected from the group menu. This window is used for setting up or modifying a filtering profile to be ...

  • Page 422

    G roup a dministrator s ection c hapter 1: g roup screen 398 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide fig. 3:1-15 adding time profile 2. Type in three to 20 alphanumeric characters—the under- score ( _ ) character can be used—for the profile name. 3. Click ok to close the pop-up ...

  • Page 423

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 399 4. In the recurrence duration time frame, specify start and end time range criteria: a. Select from a list of time slots incremented by 15 minutes: “12:00” to “11:45”. By default...

  • Page 424

    G roup a dministrator s ection c hapter 1: g roup screen 400 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • daily - if this selection is made, enter the interval for the number of days this time profile will be used. By default, “1” displays, indicating this profile will be used each...

  • Page 425

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 401 • yearly - if this selection is made, the year(s), month, and day for this time profile’s interval must be speci- fied: first enter the year(s) for the interval. By default “1” d...

  • Page 426

    G roup a dministrator s ection c hapter 1: g roup screen 402 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • end by - if this selection is made, by default today’s date displays using the mm/dd/yy format. To choose another date, click the arrow in the date drop-down menu to open the c...

  • Page 427: Category Profile

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 403 category profile the rule tab is used for creating the categories portion of the time profile. Fig. 3:1-17 time profile pop-up window, rule tab note: see the override account win...

  • Page 428: Redirect Url

    G roup a dministrator s ection c hapter 1: g roup screen 404 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide redirect url the redirect tab is used for specifying the url to be used for redirecting users who attempt to access a site or service set up to be blocked. Fig. 3:1-18 time profi...

  • Page 429: Filter Options

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 405 filter options the filter options tab is used for specifying which filter option(s) will be applied to the time profile. Fig. 3:1-19 time profile pop-up window, filter options ta...

  • Page 430: Exception Url

    G roup a dministrator s ection c hapter 1: g roup screen 406 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide exception url the exception tab is used for allowing users to be blocked from accessing specified urls and/or to be allowed to access specified urls blocked at the minimum filter...

  • Page 431

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 407 to block the group’s access to a url: 1. In the block url field, enter the url. 2. Click add to include the url in the block urls list box. To allow the url to be accessed by the...

  • Page 432: Modify A Time Profile

    G roup a dministrator s ection c hapter 1: g roup screen 408 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide modify a time profile to modify an existing time profile: 1. Select the time profile from the current time profiles list box. 2. Click view/modify to open the modify time profile...

  • Page 433

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 409 upload/download ip profile window the upload/download ip profile window displays when upload/download ip profile is selected from the group menu. This window is used for uploadin...

  • Page 434: Upload Ip Profiles

    G roup a dministrator s ection c hapter 1: g roup screen 410 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide upload ip profiles 1. Click upload file to open both the refresh message dialog box and the upload ip profiles pop-up window: fig. 3:1-22 upload ip profiles pop-up window note: l...

  • Page 435: Download Profile

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 411 download profile if profiles have been created and/or uploaded to the server: 1. Click download profile to open a browser window containing the profiles: fig. 3:1-23 download ip ...

  • Page 436: Add Sub Group

    G roup a dministrator s ection c hapter 1: g roup screen 412 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add sub group add an ip sub group from the group menu: 1. Click add sub group to open the create sub group dialog box: fig. 3:1-24 create sub group box 2. Enter the group name fo...

  • Page 437: Add Individual Ip

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 413 warning: when adding a sub-group to the tree list, sub-group users will be blocked from internet access until the minimum filtering level profile is defined via the minimum filte...

  • Page 438: Delete Group

    G roup a dministrator s ection c hapter 1: g roup screen 414 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3. Click ok to close the dialog box and to add the individual ip member to the master ip group tree. Warning: when adding an individual ip member to the tree list, the user will ...

  • Page 439: Paste Sub Group

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 415 paste sub group the paste sub group function is used for expediting the process of creating sub-groups, if the sub-group to be added has the same configuration settings as one th...

  • Page 440: Sub Group

    G roup a dministrator s ection c hapter 1: g roup screen 416 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide sub group sub group includes options for creating and maintaining the filtering profile for the sub-group. Click the sub-group’s link to view a menu of sub-topics: sub group deta...

  • Page 441: Sub Group (Ip Group) Window

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 417 sub group (ip group) window the sub group (ip group) window displays when sub group details is selected from the menu. This window is used for viewing and adding or editing detai...

  • Page 442: Add Ip Sub-Group Details

    G roup a dministrator s ection c hapter 1: g roup screen 418 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide note: see appendix e: 8e6 mobile client for information on using the mobile mode. Add ip sub-group details if the sub-group was not previously defined, the fields in the ip addre...

  • Page 443: Members Window

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 419 3. Click apply to save your entries. Once applied, the member fields become greyed-out and the apply button becomes deactivated (see fig. 3:1-28). Members window the members wind...

  • Page 444: Modify Sub-Group Members

    G roup a dministrator s ection c hapter 1: g roup screen 420 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide modify sub-group members the modify sub group member frame is comprised of the ip address and mac address frames. 1. In the ip address frame, specify whether to add or edit an ip...

  • Page 445: Exception Url Window

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 421 exception url window the exception url window displays when exception url is selected from the sub-group menu. This window is used for blocking sub-group members’ access to speci...

  • Page 446: Copy Sub Group

    G roup a dministrator s ection c hapter 1: g roup screen 422 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide copy sub group the copy sub group function is used for expediting the process of creating sub-groups, if the sub-group to be added has the same configuration settings as one that...

  • Page 447: Individual Ip

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 423 individual ip individual ip includes options for creating and maintaining the filtering profile for the individual ip member. Click the individual ip member’s link to view a menu...

  • Page 448: Member Window

    G roup a dministrator s ection c hapter 1: g roup screen 424 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide member window the member window displays when members is selected from the menu. This window is used for modifying the indi- vidual ip member’s ip address, if using the invisible...

  • Page 449: Individual Ip Profile Window

    G roup a dministrator s ection c hapter 1: g roup screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 425 individual ip profile window the individual ip profile window displays when individual ip profile is selected from the individual ip member menu. This window is used for viewing/...

  • Page 450: Delete Individual Ip

    G roup a dministrator s ection c hapter 1: g roup screen 426 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide delete individual ip delete an individual ip member to delete an individual ip member, choose delete individual ip from the individual ip member menu. This action removes the mem...

  • Page 451: Chapter 2: Library Screen

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 427 chapter 2: library screen group administrators use windows and dialog boxes in the library screen to look up urls and to add and maintain custom library categories for a group....

  • Page 452: Library Lookup

    G roup a dministrator s ection c hapter 2: l ibrary screen 428 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide library lookup library lookup window the library lookup window displays when library lookup is selected from the navigation panel. This window is used for verifying whether or ...

  • Page 453: Look Up A Url

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 429 look up a url 1. In the url lookup frame, enter the url. For example, enter http://www.Coors.Com, coors.Com, or use a wild- card by entering *.Coors.Com. A wildcard entry finds...

  • Page 454

    G roup a dministrator s ection c hapter 2: l ibrary screen 430 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide look up a search engine keyword to see if a search engine keyword or keyword phrase has been included in any library category: 1. In the search engine keyword lookup frame, ent...

  • Page 455: Custom Categories

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 431 custom categories custom categories includes options for adding a custom category to the tree list and to refresh the menu. Click the custom categories link to view a menu of t...

  • Page 456: Add Category

    G roup a dministrator s ection c hapter 2: l ibrary screen 432 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add category a unique custom library category should be created only if it does not exist in the category groups tree, and if any sub- group needs to use that library category....

  • Page 457: Refresh

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 433 tip: if this is the first custom category you are adding, you may need to double-click “custom categories” to open the tree list. Note: the category must have urls, url keyword...

  • Page 458: Custom Library Category

    G roup a dministrator s ection c hapter 2: l ibrary screen 434 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide custom library category when a custom library category is created, its long name displays in the custom categories tree list. Click the custom library category link to view a m...

  • Page 459: Library Details Window

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 435 library details window the library details window displays when library details is selected from the library category’s menu of sub-topics. This window is used for editing the ...

  • Page 460: Urls Window

    G roup a dministrator s ection c hapter 2: l ibrary screen 436 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide urls window the urls window displays when urls is selected from the custom library category’s menu of sub-topics. This window is used for viewing, adding and/or removing a url ...

  • Page 461

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 437 view a list of urls in the library category to view a list of all urls that either have been added or deleted from the master url list or master wildcard url list: 1. Click the...

  • Page 462

    G roup a dministrator s ection c hapter 2: l ibrary screen 438 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add or remove urls or wildcard urls the action tab is used for making entries in the urls window for adding or removing a url or wildcard url, uploading a master url list or ma...

  • Page 463

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 439 add a wildcard url to the library category note: wildcards are to be used for blocking only. They are not designed to be used for the exceptions function or the always allowed ...

  • Page 464

    G roup a dministrator s ection c hapter 2: l ibrary screen 440 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide remove a url from the library category to remove a url or wildcard url from the library category: 1. Click the action tab. 2. Enter the url in the edit url list frame or edit w...

  • Page 465

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 441 upload a master list to the library upload a master list of urls to upload a master file with url additions: 1. Click upload master to open the upload custom library url pop-up...

  • Page 466

    G roup a dministrator s ection c hapter 2: l ibrary screen 442 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 4. Click upload file to display the results of the library file content validation in the library file content/ip lookup options pop-up window: fig. 3:2-10 library file content...

  • Page 467

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 443 selected, ip addresses that correspond to urls in the uploaded file will be blocked along with the urls. • “upload the file without ip lookup” - if this option is selected, an ...

  • Page 468

    G roup a dministrator s ection c hapter 2: l ibrary screen 444 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3. Select the file to be uploaded. Tip: a wildcard url text file must contain one wildcard url per line. Warning: the text file uploaded to the server will overwrite the curren...

  • Page 469: Reload The Library

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 445 if the file contains valid wildcard urls, click upload to open the upload successful pop-up window. Note: in order for the urls to take effect, library categories must be reloa...

  • Page 470: Url Keywords Window

    G roup a dministrator s ection c hapter 2: l ibrary screen 446 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide url keywords window the url keywords window displays when url keywords is selected from the custom library category’s menu of sub- topics. This window is used for adding or rem...

  • Page 471: View A List of Url Keywords

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 447 warning: use extreme caution when setting up url keywords for filtering. If a keyword contains the same consecutive charac- ters as a keyword set up to be blocked, users will b...

  • Page 472: Reload The Library

    G roup a dministrator s ection c hapter 2: l ibrary screen 448 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide upload a list of url keywords to the library to upload a text file containing url keyword additions: 1. In the upload master url keyword file frame, click upload master to open...

  • Page 473

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 449 search engine keywords window the search engine keywords window displays when search engine keywords is selected from the custom library category’s menu of sub-topics. This win...

  • Page 474

    G roup a dministrator s ection c hapter 2: l ibrary screen 450 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide warning: use extreme caution when setting up search engine keywords for filtering. If a non-offending keyword contains the same consecutive characters as a keyword set up to be...

  • Page 475: Reload The Library

    G roup a dministrator s ection c hapter 2: l ibrary screen 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 451 remove a search engine keyword to remove a search engine keyword or keyword phrase from a library category: 1. In the edit search keyword list frame, enter up to 75 alphanumeri...

  • Page 476: Delete Category

    G roup a dministrator s ection c hapter 2: l ibrary screen 452 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide delete category delete a custom category to delete a custom library category, choose delete cate- gory from the menu. This action removes the library cate- gory from the custom...

  • Page 477: Echnical

    T echnical s upport / p roduct w arranties t echnical s upport 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 453 t echnical s upport / p roduct w arranties technical support for technical support, visit 8e6 technologies’s technical support web page at http://www.8e6.Com/support.Html, ...

  • Page 478: 8E6 Taiwan

    T echnical s upport / p roduct w arranties t echnical s upport 454 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide office locations and phone numbers 8e6 corporate headquarters (usa) 828 west taft avenue orange, ca 92865-4232 usa local : 714.282.6111 fax : 714.282.6116 domestic us : 1.8...

  • Page 479: Support Procedures

    T echnical s upport / p roduct w arranties t echnical s upport 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 455 support procedures when you contact our technical support department: • you will be greeted by a technical professional who will request the details of the problem and atte...

  • Page 480: Product Warranties

    T echnical s upport / p roduct w arranties p roduct w arranties 456 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide product warranties standard warranty 8e6 technologies warrants the medium on which the 8e6 product is provided to be free from defects in material and workmanship under no...

  • Page 481

    T echnical s upport / p roduct w arranties p roduct w arranties 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 457 technical support and service 8e6 technologies will provide initial installation support and technical support for up to 90 days following installation. 8e6 technologies p...

  • Page 482: Extended Warranty (Optional)

    T echnical s upport / p roduct w arranties p roduct w arranties 458 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide extended warranty (optional) the extended warranty applies to hardware and software of the product(s) except any misuse or modification of the product(s), or product(s) lo...

  • Page 483: Ppendices

    A ppendices s ection a ppendix a 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 459 a ppendices s ection appendix a filtering profile format and rules a filtering profile must be set up in a specified format, containing the following items: 1. The username or group name 2. Ip address o...

  • Page 484: Rule Criteria

    A ppendices s ection a ppendix a 460 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide rule criteria rule criteria consists of selections made from the following lists of codes that are used in profile strings: • port command codes: a = filter all ports b = filter the defined port number(...

  • Page 485

    A ppendices s ection a ppendix a 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 461 • category command codes: category command codes must be entered in the following order: j, r, m, i. “passed” should either be entered after j, r, or m, or after a string of category codes following j, ...

  • Page 486

    A ppendices s ection a ppendix a 462 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide • filter option codes: • 0x1 = exception url query (always enabled) • 0x2 = x strikes blocking • 0x4 = google/yahoo!/ask.Com/aol safe search enforcement • 0x100 = search engine keyword • 0x200 = url key...

  • Page 487: Appendix B

    A ppendices s ection a ppendix b 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 463 appendix b traveler log messages your r3000 receives 8e6 supplied library category updates and software updates via traveler, 8e6’s executable program for updating the r3000 server. You can run trav- el...

  • Page 488: General Activity

    A ppendices s ection a ppendix b 464 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide general activity startup, finish • logging to: • start running traveler • traveler has finished running. Command executed more than once • traveler is running, cannot start another traveler. • installsc...

  • Page 489: Library Download Process

    A ppendices s ection a ppendix b 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 465 library download process • needs to be updated. • does not need to be updated. • preparing for download • prepare for download -- fail • downloading files • processing downloaded files • processing down...

  • Page 490: Library Update Process

    A ppendices s ection a ppendix b 466 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide customer feedback module option • to start cfm • to run cfm • starting usage feedback/reporting upload • running usage feedback/reporting upload library update process • wrong argument! • error occurred...

  • Page 491: Error Messages

    A ppendices s ection a ppendix b 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 467 error messages • running traveler encounters an exception. • alert emails could not be read. " file>" does not exist. • reloading library encounters an exception • send alert encountered an exception • ...

  • Page 492: Summary Messages

    A ppendices s ection a ppendix b 468 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide weekly update (7 days library) • download library update: • download thread interrupted during retries. • successfully downloaded • failed to download • failed to download library • successfully downloa...

  • Page 493

    A ppendices s ection a ppendix b 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 469 full url library update (urls, url keywords) • download full library: • failed to download library • successfully download library! • failed to unzip • full url library update has completed. All library...

  • Page 494: Patch Update

    A ppendices s ection a ppendix b 470 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide search engine keywords library update • download keyword library: • fail to download keyword library due to connection fail! • successfully downloaded • fail to download • search engine keyword library ...

  • Page 495: Appendix C

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 471 appendix c create a custom block page 8e6 offers ways for you to customize the block page so that the page can have a different look while retaining the infor- mation/functionality provided in 8e6’s def...

  • Page 496: 2. Exclude Filtering Ip

    A ppendices s ection a ppendix c 472 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide option 2: modify the r3000 console • pros: can be done from the r3000 console. • cons: must be set up for each sub-group. 1. Make modifications in one of the redirect url tabs: • go to: group > ip > “gr...

  • Page 497: 1. Set Up A Web Server

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 473 part ii: customize the block page 1. Set up a web server a web server must be set up to hold the customized block page. 2. Create a customized block page the customized block page must be accessible via...

  • Page 498: Part Iii: Restart The R3000

    A ppendices s ection a ppendix c 474 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide implement the “further option” (optional) the “further option” is included in 8e6’s default block page. If used, the needs to provide a link back to r3000’s options page and post the required hidden for...

  • Page 499: Reference

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 475 reference html function parsedata(str, start, end) { result = ""; i = str.Indexof(start); if (i >= 0) { len = str.Length; substr = str.Substr(i+start.Length, len - start.Length); j = substr.Indexof(end)...

  • Page 500

    A ppendices s ection a ppendix c 476 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide document.Block.User.Value = user; } } function showdata(){ document.Write("url:" + document.Block.Url.Value + ""); document.Write("ip:" + document.Block.Ip.Value + ""); document.Write("cat:" + document....

  • Page 501: Cgi Written In Perl

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 477 cgi written in perl there are two methods for cgi written in perl: one lets you embed data in the query string to pass data to the options cgi, and the other lets you use java script to post form data t...

  • Page 502

    A ppendices s ection a ppendix c 478 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide block.Cgi?Url=$url&ip=$ip&cat=$cat&user=$user&step=step2\">click here"; print " "; print " "; use java script to post form data #!/usr/bin/perl # original filename: cusp_block2.Cgi # file type: cg...

  • Page 503

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 479 print " print " value=\"_block_site_\">"; print ""; print ""; print ""; print ""; print ""; print "r3000 customized block page (cgi written with perl using java script to post form data)";...

  • Page 504: Cgi Written In C

    A ppendices s ection a ppendix c 480 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide cgi written in c /* * cusc_block.C * description: sample c source code of cgi for customized block page * replace with real ip and recompile before using * revision: 1 * date: 03/08/2004 */ #include str...

  • Page 505

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 481 unescape_url(paramv); paramn = (char *)makeword(paramv, '='); to_upper(paramn); if (strcmp(paramn, "ip") == 0) strcpy(szip, paramv); else if (strcmp(paramn, "url") == 0) strcpy(szurl, paramv); else if (...

  • Page 506

    A ppendices s ection a ppendix c 482 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide { printf(""); printf(" printf(""); printf("function do_options()"); printf("{"); printf("document.Block.Action=\"http://:81/cgi/ block.Cgi\""); printf("document.Block.Submit()"); printf("}...

  • Page 507

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 483 { url[x] = x2c(&url[y+1]); y+=2; } } url[x] = '\0'; } char x2c(char *what) { register char digit; digit = (what[0] >= 'a' ? ((what[0] & 0xdf) - 'a')+10 : (what[0] - '0')); digit *= 16; digit += (what[1]...

  • Page 508

    A ppendices s ection a ppendix c 484 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide char *word; int ll; wsize = 102400; ll=0; word = (char *) malloc(sizeof(char) * (wsize + 1)); while(1) { word[ll] = (char)fgetc(f); if(ll==wsize) { word[ll+1] = '\0'; wsize+=102400; word = (char *)reall...

  • Page 509

    A ppendices s ection a ppendix c 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 485 } void getquery(char *paramd, char **paramv) { if (paramd == null) *paramv = null; else *paramv = (char *)strtok(paramd, "&"); } void getnextquery(char **paramv) { *paramv = (char *)strtok(null, "&"); }.

  • Page 510: Appendix D

    A ppendices s ection a ppendix d 486 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide appendix d override pop-up blockers an override account user with pop-up blocking software installed on his/her workstation will need to temporarily disable pop-up blocking in order to authenticate him/...

  • Page 511

    A ppendices s ection a ppendix d 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 487 yahoo! Toolbar pop-up blocker if pop-up blocking is enabled 1. In the options page (see fig. D-1), enter your username and password. 2. Press and hold the ctrl key on your keyboard while simultaneously ...

  • Page 512

    A ppendices s ection a ppendix d 488 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide fig. D-3 allow pop-ups from source 3. Select the source from the sources of recently blocked pop-ups list box to activate the allow button. 4. Click allow to move the selected source to the always allow...

  • Page 513

    A ppendices s ection a ppendix d 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 489 google toolbar pop-up blocker if pop-up blocking is enabled 1. In the options page (see fig. D-1), enter your username and password. 2. Press and hold the ctrl key on your keyboard while simultaneously ...

  • Page 514: Adwaresafe Pop-Up Blocker

    A ppendices s ection a ppendix d 490 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide adwaresafe pop-up blocker if pop-up blocking is enabled 1. In the options page (see fig. D-1), enter your username and password. 2. Press and hold the ctrl key on your keyboard while simultaneously clic...

  • Page 515

    A ppendices s ection a ppendix d 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 491 mozilla firefox pop-up blocker add override account to the white list 1. From the browser, open the preferences dialog box. 2. Go to the category list box and select privacy & security > popup windows t...

  • Page 516: Set Up Pop-Up Blocking

    A ppendices s ection a ppendix d 492 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide windows xp sp2 pop-up blocker set up pop-up blocking there are two ways to enable the pop-up blocking feature in the ie browser. Use the internet options dialog box 1. From the ie browser, go to the too...

  • Page 517: Use The Ie Toolbar

    A ppendices s ection a ppendix d 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 493 use the ie toolbar in the ie browser, go to the toolbar and select tools > pop- up blocker > turn on pop-up blocker: fig. D-8 toolbar setup when you click turn on pop-up blocker, this menu selec- tion c...

  • Page 518: Use The Ie Toolbar

    A ppendices s ection a ppendix d 494 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add override account to the white list there are two ways to disable pop-up blocking for the over- ride account and to add the override account to your white list. Use the ie toolbar 1. With pop-up bloc...

  • Page 519: Use The Information Bar

    A ppendices s ection a ppendix d 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 495 use the information bar with pop-up blocking enabled, the information bar can be set up and used for viewing information about blocked pop- ups or allowing pop-ups from a specified site. Set up the info...

  • Page 520

    A ppendices s ection a ppendix d 496 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 3. Click the information bar for settings options: fig. D-11 information bar menu options 4. Select always allow pop-ups from this site—this action opens the allow pop-ups from this site? Dialog box: fi...

  • Page 521: Appendix E

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 497 appendix e 8e6 mobile client 8e6 mobile client performs internet filtering and blocking on mobile pcs physically located outside your organization. This product is comprised of an “external” mobile r300...

  • Page 522: Environment Requirements

    A ppendices s ection a ppendix e 498 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide environment requirements workstation requirements minimum system requirements for the administrator include the following: • windows 2000 or xp operating system running ie 6.0 or higher, or firefox 1.0 ...

  • Page 523: Work Flow Overview

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 499 work flow overview mobile client installed on a mobile pc for mobile pcs located outside of the organization: • a mobile r3000 filtering appliance set in the mobile mode is used for obtaining the end us...

  • Page 524: Network Operations Overview

    A ppendices s ection a ppendix e 500 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide network operations overview 8e6 mobile client on the network the following diagram illustrates the functionality of the 8e6 mobile client product in conjunction with an existing, internal r3000 filterin...

  • Page 525: Enterprise Reporter

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 501 url is found and the site is disallowed, the mobile client software blocks the connection to the web server. Enterprise reporter a. The mobile r3000 appliance sends logs to the local enterprise reporter...

  • Page 526: Mobile Server Section

    A ppendices s ection a ppendix e 502 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide mobile server section the mobile server section of this user guide contains infor- mation on how to set up and configure this mobile r3000’s hardware and software to be used with the mobile client. Init...

  • Page 527

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 503 configure the r3000 to use the mobile mode the operation mode window is used for setting up the external mobile r3000 to use the mobile mode for filtering mobile pcs. 1. In the mode frame, select “mobil...

  • Page 528

    A ppendices s ection a ppendix e 504 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide notes: the following features are not available when using the mobile mode: minimum filtering level, time profile, override account, exception url, nt/ldap authentication, and the warn filter setting. (...

  • Page 529

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 505 add mac addresses to the master ip group in the mobile mode, the master ip group members window is used for adding mobile pc mac addresses. Mac addresses are used for obtaining mobile pc members’ filter...

  • Page 530

    A ppendices s ection a ppendix e 506 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide select mac addresses for a sub group in the mobile mode, the sub-group members window is used for selecting mac addresses for inclusion in the sub- group. Fig. E:2-3 members window , sub-group with mac ...

  • Page 531

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 507 • to remove mac addresses from the sub-group, select each sub-group by highlighting it in the member mac(s) list box, and then clicking the right arrow to move the item(s) to the available mac(s) list b...

  • Page 532: View Sub Group Mac Addresses

    A ppendices s ection a ppendix e 508 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide view sub group mac addresses when using the mobile mode, the sub group (ip group) window is used for viewing this sub-group’s mac addresses previously added in the sub-group’s members window. Fig. E:2-4...

  • Page 533

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 509 add a mac address to an individual member when using the mobile mode, the individual ip’s member window is used for selecting the member’s mac address for inclusion in the sub-group. Fig. E:2-5 member w...

  • Page 534

    A ppendices s ection a ppendix e 510 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide upload mac address file for ip group a file containing multiple mac addresses can be uploaded to the master ip group using the upload/download ip profile window. Fig. E:2-6 master ip group’s upload/down...

  • Page 535: Troubleshoot Mac Addresses

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 511 note: for other examples of entries to include in the profile file, go to http://www.8e6.Com/r3000help/files/ 2group_ipprofiles.Html. Troubleshoot mac addresses when using the mobile mode, the active pr...

  • Page 536: Mobile Client Section

    A ppendices s ection a ppendix e 512 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide mobile client section the mobile client section of this user guide contains infor- mation on how the windows network administrator uses the 8e6 mobile client windows deployment kit to install the 8e6 mo...

  • Page 537

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 513 download and install the deployment kit to download the 8e6 mobile client windows deployment kit to your machine: 1. Insert the cd-rom that was sent with your r3000 server into your machine. 2. Open the...

  • Page 538

    A ppendices s ection a ppendix e 514 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 5. Click next to proceed in specifying the destination folder into which the downloaded file will be installed: fig. E:3-2 destination folder step of wizard 6. Specify the destination folder to be used,...

  • Page 539

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 515 7. Click next to begin the installation process: fig. E:3-4 installation process in progress the following page displays when the installation process is complete: fig. E:3-5 installation complete 8. Cl...

  • Page 540

    A ppendices s ection a ppendix e 516 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide access the mobile client configuration editor once the 8e6 mobile client has been installed, the mobile client configuration editor should be used for specifying parameters to be used by the mobile clie...

  • Page 541

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 517 select the package: windows or macintosh os x 1. In the mobile client configuration editor pop-up window, select file > open... To open the open dialog box: fig. E:3-7 open dialog box 2. Select the file...

  • Page 542

    A ppendices s ection a ppendix e 518 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide fig. E:3-8 windows package opened fig. E:3-9 macintosh package opened.

  • Page 543: Add, Remove Mobile R3000

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 519 configure the mobile client for deployment note: before exiting the 8e6 mobile client configuration editor, be sure to go to file > save as... To save your entries. Add, remove mobile r3000 1. Click the...

  • Page 544: Add, Remove Internal R3000

    A ppendices s ection a ppendix e 520 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide add, remove internal r3000 1. Click the ellipses (...) button to the right of the internal filter host(s) field to open the add/remove internal filter host(s) dialog box: fig. E:3-11 add/remove internal...

  • Page 545

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 521 add proxy address or host name 1. If your organization is using a proxy server on the network, in the proxy address or host name field, enter the ip address or host name of your proxy server. 2. In the ...

  • Page 546

    A ppendices s ection a ppendix e 522 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide fig. E:3-13 proxy address fields populated option: block all urls if filter cannot be found the “block all urls if filter cannot be found” checkbox is checked by default. This setting indicates that if ...

  • Page 547: Save Settings

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 523 windows option: force reboot with user logged in normally, the mobile client is installed during the worksta- tion boot cycle when the windows group policy manager runs a software assignment policy. How...

  • Page 548: Deployment to A Group

    A ppendices s ection a ppendix e 524 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide mobile client deployment to windows computers deployment to a group the modified 8e6client.Msi file is distributed to multiple windows workstations using windows group policy by creating a group policy ...

  • Page 549

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 525 3. Link the new policy: a. In the gpmc, select the domain or organizational unit for which the policy should be applied. B. Right-click, choose "link an existing gpo", and then select the new policy you...

  • Page 550

    A ppendices s ection a ppendix e 526 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 5. Enable the policy link: return to the new policy link in the gpmc for the target domain or organizational unit, right-click, and then choose "link enabled". 6. Test the deployment: a. Select one of t...

  • Page 551

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 527 installation on a single computer the 8e6 mobile client is manually installed on an single windows workstation by following these procedures: 1. Go to the folder in which the modified 8e6client.Msi file...

  • Page 552

    A ppendices s ection a ppendix e 528 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide mobile client removal from computers uninstallation from a windows group if the group policy that was used for installing the mobile client on workstations is removed, the mobile client will still remai...

  • Page 553

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 529 • windows xp: start > control panel > add or remove programs • windows 2000: start > settings > control panel > add/remove programs 2. Find the 8e6 mobile client program and click remove in windows xp, ...

  • Page 554

    A ppendices s ection a ppendix e 530 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 5. Access the 8e6 mobile client configuration editor, and go to tools > create uninstall key... To open the create uninstall key pop-up window: fig. E:3-18 generate a key in the machine id field, enter ...

  • Page 555

    A ppendices s ection a ppendix e 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 531 7. Access the uninstall dialog box again, and enter the generated password key in the key field. In this example: 0d72dd fig. E:3-20 uninstall the mobile client 8. Click ok to begin the uninstallation p...

  • Page 556: Appendix F

    A ppendices s ection a ppendix f 532 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide appendix f configuring the r3000 for er reporting when configuring the r3000 to be used with an er unit, the following procedures must be completed in order for the er to receive logs from the r3000. En...

  • Page 557

    A ppendices s ection a ppendix f 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 533 click add to include this ip address in the remote server list box. Note: to remove an ip address from the list box, select it and click remove. 4. After the er has been configured, and logs have been t...

  • Page 558

    A ppendices s ection a ppendix f 534 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide entries in the er administrator console to see if log files have transferred: 1. Access the er’s administrator console. 2. From the database pull-down menu, choose tools to display the tools screen. 3. ...

  • Page 559: Appendix G

    A ppendices s ection a ppendix g 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 535 appendix g raid maintenance this appendix pertains to r3000 “h”, “sl”, and “hl” servers and is divided into three parts: hardware components, server interface, and troubleshooting—in the event of a fail...

  • Page 560: Part 2: Server Interface

    A ppendices s ection a ppendix g 536 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide part 2: server interface led indicators in sl and hl units on an “sl” and “hl” unit, the following led indicators for software and hardware status monitoring display on the left side of the front panel:...

  • Page 561

    A ppendices s ection a ppendix g 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 537 led indicator chart below is a chart of led indicators in the “sl” and “hl” unit: led indicator color condition description fltr green on filtering traffic amber on library being uploaded or one or more...

  • Page 562

    A ppendices s ection a ppendix g 538 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide front control panels on h, sl, and hl units control panel buttons, icons, and led indicators display on the right side of the front panel. The buttons let you perform a function on the unit, while an le...

  • Page 563

    A ppendices s ection a ppendix g 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 539 overheat/fan fail (icon) – this led is unlit unless the chassis is overheated. A flashing red led indicates a fan failure. A steady red led (on and not flashing) indicates an overheating condi- tion, wh...

  • Page 564

    A ppendices s ection a ppendix g 540 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide rear panels on h and hl units uid (led indicator) – on the rear of the “h” or “hl” chassis, to the left of the power supplies, a steady blue uid led indi- cator displays when the uid button on the contr...

  • Page 565: Part 3: Troubleshooting

    A ppendices s ection a ppendix g 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 541 part 3: troubleshooting the text in this section explains how the server alerts the administrator to a failed component, and what to do in the event of a failure. Hard drive failure step 1: review the n...

  • Page 566

    A ppendices s ection a ppendix g 542 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide step 2: verify the failed drive in the admin console the hardware failure detection window in the adminis- trator console is accessible via the system > hardware failure detection menu selection: fig. G...

  • Page 567

    A ppendices s ection a ppendix g 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 543 step 3: replace the failed hard drive after verifying the failed hard drive in the administrator console, go to the server to replace the drive. Press the red release button to release the handle on the...

  • Page 568: Power Supply Failure

    A ppendices s ection a ppendix g 544 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide step 4: rebuild the hard drive once the failed hard drive has been replaced, return to the hardware failure detection window in the administrator console, and click rebuild to proceed with the rebuild p...

  • Page 569

    A ppendices s ection a ppendix g 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 545 step 3: replace the failed power supply remove the failed power supply by locating the red release tab (1) and pushing it to the right (2), then lifting the curved metal handle and pulling the power sup...

  • Page 570: Fan Failure

    A ppendices s ection a ppendix g 546 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide fan failure identify a fan failure a flashing red led indicates a fan failure. If this displays on your unit, contact technical support for an rma (return merchandise authorization) number and for instr...

  • Page 571: Appendix H

    A ppendices s ection a ppendix h 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 547 appendix h glossary this glossary includes definitions for terminology used in this user guide. 8e6 supplied category - a library category that was created by 8e6, and includes a list of urls, url keywo...

  • Page 572

    A ppendices s ection a ppendix h 548 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide associated filtering profiles. The global administrator config- ures the r3000, sets up master ip groups, and performs routine maintenance on the server. Group administrator - an authorized administrato...

  • Page 573

    A ppendices s ection a ppendix h 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 549 machine name - pertains to the name of the user’s work- station machine (computer). Master ip group - an ip group set up in the tree menu in the group section of the console, comprised of sub-groups and...

  • Page 574

    A ppendices s ection a ppendix h 550 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide network address translation (nat) - allows a single real ip address to be used by multiple pcs or servers. This is accomplished via a creative translation of inside “fake” ip addresses into outside real...

  • Page 575

    A ppendices s ection a ppendix h 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 551 may be used for security reasons or in conjunciton with caching for bandwidth and performance reasons. Quota - the number of minutes configured for a passed library category in an end user’s profile tha...

  • Page 576

    A ppendices s ection a ppendix h 552 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide transfer protocol (nntp), secured http transmission (https), and other ports such as secure shell (ssh). Smtp - simple mail transfer protocol is used for transfer- ring email messages between servers. S...

  • Page 577

    A ppendices s ection a ppendix h 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 553 warn setting - a setting assigned to a library category or uncategorized urls when creating a rule, or when setting up a filtering profile. This designation indicates urls in the library category or unc...

  • Page 578

    A ppendices s ection a ppendix h 554 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide.

  • Page 579: Ndex

    8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 555 i ndex numerics 8e6 appliance watchdog 155 , 254 8e6 mobile client 497 8e6 mobile client windows deployment kit 512 8e6 supplied category 24 , 331 definition 547 a account password security 103 setup 100 active connections diagnostic t...

  • Page 580

    I ndex 556 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide block page route table window 98 block setting 26 definition 547 button, terminology 4 c calculator 67 category 8e6 supplied category 331 codes 461 custom categories 431 custom category 24 library 24 category codes 461 category ...

  • Page 581

    I ndex 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 557 customization menu 212 d diagnostics menu 112 dialog box, terminology 4 disk usage diagnostic tool 118 dmz 502 e emergency update log window 315 enterprise reporter 97 , 349 , 532 environment requirements 10 , 498 eula 240 excep...

  • Page 582

    I ndex 558 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide ftp cfm 321 change log ftp setup 130 proxy setting 304 report configuration 352 g global administrator 1 , 2 add account 100 definition 547 global filtering profile 22 global group 17 category profile 271 default redirect url 27...

  • Page 583

    I ndex 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 559 help topics 57 hl server 535 https 10 , 69 login 50 port numbers 460 proxy environment 172 https filtering 76 i individual ip 423 individual ip member add to group 413 definition 548 delete 426 profile type 21 individual ip prof...

  • Page 584

    I ndex 560 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide url, 8e6 supplied category 338 url, custom category 446 l lan settings window 92 ldap definition 548 led indicators 536 library full url update 306 lookup 317 , 428 manual updates 305 patch update 306 search engine keywords, 8e6...

  • Page 585

    I ndex 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 561 backup/restore 186 emergency patch update 315 er 532 library update 309 library update message 463 patch updates 144 r3000 log transfer 348 realtime traffic, usage 120 log off administrator gui 68 log on administrator gui 50 log...

  • Page 586

    I ndex 562 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide minimum filtering level window 290 categories profile 290 port profile 293 mobile mode 253 , 376 , 417 , 419 , 424 , 497 definition 549 mode menu 166 n name resolution, definition 549 nat 38 , 153 , 158 definition 550 navigation...

  • Page 587

    I ndex 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 563 definition 550 global group 280 google toolbar popup blocking 489 mozilla firefox popup blocking 491 override popup blockers 486 profile type 22 windows xp sp2 popup blocking 492 yahoo! Toolbar popup blocking 487 override accoun...

  • Page 588

    I ndex 564 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide global group 270 group 388 individual ip member 425 minimum filtering level 290 sub-group 420 profile control window 228 profile string definition 550 elements 460 protocol, definition 550 proxy environment settings window 172 p...

  • Page 589

    I ndex 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 565 real time probe window 354 realtime traffic logs 120 re-authentication block page authentication 80 reboot window 88 recent logins diagnostic tool 117 redirect url global group 275 refresh the gui 66 regional setting window 96 r...

  • Page 590

    I ndex 566 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide search engine keywords window 342 custom category 449 secure logon menu 103 self-monitoring process 133 service port 25 definition 551 setup window 152 shadow log format window 368 shift key 66 shutdown window 87 sl server 535 s...

  • Page 591

    I ndex 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 567 status window 160 sync items 42 synchronization menu 150 system command window 113 system performance diagnostic tool 117 system requirements 10 , 498 system screen 55 system uptime diagnostic tool 118 t tar profile 20 target mo...

  • Page 592

    I ndex 568 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide patches 144 updates menu 302 upload/download ip profile window 409 mac addresses 510 ups 69 upstream failover detect 254 url keyword filter control global group filter option 279 url keyword filtering 279 url keywords window 338...

  • Page 593

    I ndex 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide 569 x x strikes blocking global group filter option 277 x strikes blocking window 196.

  • Page 594

    I ndex 570 8 e 6 t echnologies , r3000 e nterprise f ilter u ser g uide.