Bang & Olufsen BeoVision 7 Manual - page 29
Adjust picture and sound settings
Picture and sound settings are preset from the factory to neutral values which
suit most viewing and listening situations. However, if you wish, you can adjust
these settings to your liking.
Temporary settings
‘DEFAULT VIDEO’
‘DEFAULT AUDIO‘
To only store picture and sound settings until you switch off the TV, press and hold
BACK
instead of the
centre
button when
you accept the settings.
The speaker combination chosen in the ‘DEFAULT VIDEO’ submenu is activated automatically when you switch on a video
source via the TV.
The speaker combination chosen in the ‘DEFAULT AUDIO’ submenu is activated automatically when you switch on an audio
source via the TV.
Preset volume, bass, treble or loudness, up to
two connected BeoLab subwoofers and two
default loudspeaker combinations. The contents
of the ‘SOUND’ menu vary according to what
you have connected to the TV. See also p. 22
about speaker combinations.
Adjust sound
Adjust brightness, colour and contrast. For
information on picture format, see p. 22.
Adjustments made to the ‘TINT’ setting only
apply to the current channel.
Adjust picture
Enter and accept
settings
Select ‘OPTIONS’
menu
Bring up ‘TV SETUP’
menu
Enter and accept
settings
Select ‘SOUND’ in
‘OPTIONS’ menu
Bring up ‘TV SETUP’
menu
Select ‘PICTURE’
menu
Select
‘ADJUSTMENT’
menu
Remove the picture from the screen temporarily.
Mute the picture
Select
Picture
Bring up
Scene
display on Beo5
Select
PictureMute
to mute/restore
PICTURE
BRIGHTNESS
.......
.
.......
CONTRAST
.......
.
.......
COLOUR
.......
.
.......
TINT
.......
.
.......
SIZE
.......
.
.......
HOR. SIZE
.......
.
.......
VERT. SIZE
.......
.
.......
HOR. POSITION
.......
.
.......
VERT. POSITION
.......
.
.......
select
SOUND ADJUSTMENT
VOLUME
.......
.
.......
BASS
.......
.
.......
TREBLE
.......
.
.......
SUBWOOFER
.......
.
.......
LOUDNESS
ON
DEFAULT VIDEO
SPEAKER3
DEFAULT AUDIO
SPEAKER2
store
27
NTSC signal only
1080p/i signal only
VGA signal only