Bang & Olufsen BeoVision 7 Manual - page 46
First-time setup of your television
TV tuner
Connections
The ‘TUNING’ menu is only available if the TV tuner is enabled, see pp. 29 and
50.
Select the type of equipment connected to each socket, the sockets used, the
product name, and the source name.
Information
This first-time setup procedure is activated when the TV is connected to the mains
and switched on for the first time. If you want to change your setup at a later date,
you can access the same menus and update your settings.
1
*NOTE! When you have selected the preferred
settings in a menu, you may have to press the
green button to continue to the next menu in the
first-time setup procedure. Follow on-screen
instructions.
Switch on the TV
Select settings
You are led through the following settings only
when you switch on the TV for the first time.*
1
It takes the TV approx. 20 seconds to start up and
become ready for use.
Switch on
Select setting
Accept and go to next menu item
Set the on-screen menu language
Disable or enable internal TV tuner or DVB
Register connected equipment, see p. 37
Tune in TV channels automatically, see also p. 26. Available only if
the TV tuner is enabled, see p. 29.
Calibrate the speakers
Set up the speakers to optimise sound from your
listening position.
First-time setup of loudspeakers applies only to speakers for TV
viewing. After first-time setup, you can set up speakers for Home
cinema viewing. See also ‘
Loudspeaker setup
’ on pp. 46–47 and
‘
Surround sound and Home cinema
’ on p. 22.
Adjust volume, bass, treble and loudness and preset two default
speaker combinations. Select a different speaker combination at any
time. See pp. 22 and 27.
MENU LANGUAGE
TUNER SETUP
CONNECTIONS
AUTO TUNING
SPEAKER TYPES
SPEAKER ROLES
SPEAKER DISTANCE
SPEAKER LEVEL
SOUND ADJUSTMENT
TV
44