Bang & Olufsen BeoVision 7 Manual - page 10
Surround sound and Home cinema
You can extend your television into a
surround sound system by adding
Bang & Olufsen loudspeakers and up
to two BeoLab 2 subwoofers.
When you switch on one of the
sources, speakers in a surround
sound system can be cut in or out,
depending on what kind of sound
suits the source you are using.
If you connect a projector, you can
turn your television into a Home
cinema. When you switch to the
Home cinema setup, the television
switches the picture from its own
screen to the projector screen and
activates the appropriate speakers.
For further information about how to
connect speakers to the television,
refer to the chapter
‘Set up the
television’
on page 16 in the
Reference book.
You can select the speaker combination that
suits the source you are using, provided that
the various speaker modes are available in
your television.
Press repeatedly to display
SPEAKER on Beo4
Press if you want to return to the
chosen default sound setting,
or …
… press the number of the
speaker combination you want.
The selected speakers cut in
automatically
Press to remove SPEAKER from
the Beo4 display and to return to
the source you were using
Speaker combinations
SPEAKER 1
… Sound in the centre speaker only.
SPEAKER 2
… Stereo sound in the front speakers.
Subwoofers are active.
SPEAKER 3
… The centre speaker, front speakers
and subwoofers are active.
SPEAKER 4
… The front speakers, surround
speakers, and subwoofers are active.
SPEAKER 5
… Surround sound from all speakers
and subwoofers. For programmes encoded in
Surround Sound.
If you have added only two front speakers to the
television, you will only be able to choose
SPEAKER 1–3.
Select speakers for movie sound
LIST
SPEAKER
GO
1
–
5
EXIT
10