Bang & Olufsen BeoVision 7 Manual - page 20
The pincode system
The pincode system is intended to
make normal use of your television
impossible for someone who does
not know the pincode. You choose
whether or not to activate the
pincode system.
When the pincode system is activated
and the television has been
disconnected from the mains for 15–
30 minutes, the pincode system goes
into effect.
When reconnected and switched on,
the television automatically switches
itself off after four minutes. Entering
the pincode returns the television to
normal.
Note: If you change your pincode more than
five times within a three-hour period, the
PINCODE menu becomes inaccessible for three
hours, assuming that the television is not
disconnected from the mains. Disconnecting
the television resets the three-hour period.
Activate the pincode system
If you wish to deactivate the pincode system,
you can do so by deleting your pincode.
To activate the pincode system …
> Press
MENU
to bring up the TV SETUP menu.
> Press twice, followed by
STOP
. The PINCODE
menu appears on the screen.
> Use the number buttons on Beo4 to enter the
four digits of your code.
> Press
GO
after the last digit is found.
> Re-enter your code to confirm it and press
GO
again. If the two codes are not identical, the
input fields are cleared and you must enter the
code again.
To change or delete your pincode …
> Press
MENU
to bring up the TV SETUP menu.
> Press twice, followed by
STOP
. The PINCODE
menu appears on the screen.
> Enter the correct pincode and press
GO
.
DELETE PINCODE is highlighted.
> To delete your code, press
GO
.
> To change your code, press to highlight
NEW PINCODE and press
GO
. Enter the new
code using the number buttons and press
GO
.
Re-enter the new code to confirm it.
If you inadvertently press a wrong button while
entering a code, press STOP. The entry is
cancelled and the input fields are cleared.
PINCODE
next
accept
GO
PINCODE
0
. . .
CONFIRM PINCODE
. . . .
PINCODE
select
GO
DELETE PINCODE
NEW PINCODE
20