Barazza Velvet FIVLT Series Installation And Use Manual - Kundendienst
35
ENTSORGUNG NACH AUSSERBETRIEBNAHME
Das Produkt darf nach Außerbetriebnah-
me NICHT mit anderen Abfällen entsorgt
werden, sondern muss bei entsprechen-
den Sammelstellen für Elektro- und
Elektronikabfälle angeliefert werden; Bei
widerrechtlicher oder nicht korrekter Entsorgung
des Produkts werden die nach den gültigen Vor-
schriften vorgesehenen Sanktionen verhängt.
Für weitere Informationen wenden Sie sich
bitte an ihr örtliches Entsorgungsbüro.
Das Gerät für die Entsorgung unbrauchbar
machen, durch Abtrennen des Netzsteckers.
KUNDENDIENST
Barazza srl sichern Ihnen eine ausgezeichnete
Zusammenarbeit zu, sollten technische Probleme
oder andere Schwierigkeiten auftreten.
Vorgehensweise bei Betriebsstörungen
Vor der Kontaktaufnahme mit dem am günstigsten
gelegenen Kundendienstzentrum, die nachfolgenden
Arbeiten ausführen:
• prüfen, ob elektrischer Strom vorhanden ist;
• wenn das Touch Screen Display funktioniert, den
Bildschirm U
NTERSTÜTZUNG
(
Abb. 30 S. 27)
aufrufen: Er
liefert die Daten des Unternehmens, des Backofens
und etwaige Fehlermeldungen, die dem Kunden-
dienstzentrum mitzuteilen sind;
• wenn das Touch Screen Display nicht funktioniert,
die Gerätedaten über das Typenschild ermitteln
(Position Typenschild - siehe S. 12);
• Kaufdatum des Geräts bereithalten.
Achtung! Bis zur Lösung des Problems darf
das Gerät nicht verwendet werden und muss von
der Stromversorgung getrennt werden. Versuchen
Sie nicht, das Gerät, oder Teile davon, zu reparieren
oder zu verändern: neben dem Verlust der Garan-
tie kann dies auch potentiell gefährlich sein.
Verlangen Sie ausschließlich die Verwendung
von Original-Ersatzteilen: durch Verwendung
von Ersatzteilen, die nicht vom Hersteller
stammen, erlischt die Garantie und es kann zu Perso-
nenschäden oder Schäden am Gerät kommen.
END-OF-LIFE DISPOSAL
At the end of its service life, the product
must NOT be disposed of together with
other waste but must be disposed of sepa-
rately in the appropriate separate waste
collection centres for electronic and elec-
trotechnical waste; illegal or incorrect disposal of
the product entails the application of sanctions
provided for in current legislation.
For more information, contact your local waste
disposal service.
Before disposing of the appliance, render it
unusable by removing the power cord.
AFTER-SALES SERVICE
Barazza srl ensures you the utmost collaboration
in the event of technical problems or for any other
needs you may have.
Procedure to follow if your appliance is malfunc-
tioning
Before contacting your nearest Service Centre, do the
following:
• check that the appliance is supplied with power;
• if the Touch Screen display is operating, access the
A
SSISTANCE
screen
(fig. 30 on page 27)
: it provides the
company data, oven data and any error messages to
be reported to the Service Centre;
• if the Touch Screen display is not operating, obtain the
appliance data from the data plate (for the data plate
position - see page 12);
• find the appliance purchase data.
Attention! While waiting for resolution of
the problem, you should stop using the appliance
and disconnect it from the power supply. Do not
attempt to repair or modify the appliance in any of
its parts: in addition to voiding the Guarantee, this
may be dangerous.
Request or demand that only original spare parts
be used: the use of components other than those
supplied by the manufacturer voids the Guaran-
tee and may cause personal injuries or damage the
appliance.