Barbecook Quisson 4000 User Manual - page 17
www.barbecook.com
17
•
Normal wear and tear (rusting, distortion, discolouration...) of
parts that are directly exposed to fire or intense heat. It is
normal to replace these parts from time to time.
•
Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as
manufacturing defects.
•
All damages caused by inadequate maintenance, incorrect
storage, improper assembly or modifications made to
pre-assembled parts.
•
All damages caused by misuse and abuse of the appliance
(not using it according to the instructions in this manual,
using it for commercial purposes...).
•
All consequential damages caused by careless or
non-compliant use of the appliance.
•
Rust or discolouration caused by external influences, the use
of aggressive detergents, exposure to chlorine... These
damages are not regarded as manufacturing defects.
14
TECHNICAL SPECIFICATIONS
14.1 Type label
The type label lists all the technical specifications of your
appliance. You can find it:
•
In the second part of this manual.
•
On the inside of the cabinet door.
14.2 Injector diameters
•
Main burner: 0,99 mm
•
Side burner: 0,65 mm
•
Spit burner 0,82 mm
!gas_quisson_standard.book Page 17 Tuesday, September 2, 2014 2:13 PM