Campbell Hausfeld DG490500CK Operating instructions manual
20 Sp
Manual de Instrucciones
Operating Instructions
DG490500CK, DG490700CK
S
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain
the product described. Protect yourself and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain instructions for future reference.
IN713800AV 3/06
For parts, product & service information
visit www.chpower.com
BUILT TO LAST
© 2006 Campbell Hausfeld/Scott Fetzer
See Warranty on page 6 for important information about commercial use of this product.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
Description
Bench grinders are useful for
sharpening tools (drills, scissors, chisels,
etc.); refacing tools (removing burrs
from tool edges); and removing
material as wanted.
The two different types of wheel allow
the grinder to meet various needs.
Typically, use the coarse grinding wheel
for rough cutting -- removing a larger
amount of material. Use the medium
wheel for finishing to leave a smoother
surface.
Unpacking
When unpacking this product, carefully
inspect for any damage that may have
occurred during transit.
General Safety
Information
This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS.
To help recognize this information,
observe the following symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates
a potentially
hazardous situation which, if not
avoided, could result in death or serious
injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, may result in minor or moderate
injury.
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
NOTICE
!
CAUTION
!
WARNING
!
DANGER
DG490500CK
DG490700CK
Specifications
DG490500CK
Voltage
120V 60Hz
Power Rating
4.7 A
H.P.
3/4
R.P.M.
3550
Wheel Sizes
8" x 3/4" x 5/8"
Weight
30 lbs.
Specifications
DG490700CK
Voltage
120V 60Hz
Power Rating
10 A
H.P.
1/2
R.P.M.
3550
Wheel Sizes
6" x 3/4" x 1/2"
Weight
23.5 lbs.
Bench Grinder
with Lamp
CALIFORNIA PROPOSITION 65
You
can
create dust when you cut,
sand, drill or grind materials
such as wood, paint, metal,
concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm. Wear
protective gear.
This product or its
power cord contains chemicals known to
the State of California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.
The following safety precautions must be
followed at all times along with any
other existing safety rules.
!
WARNING
!
DANGER
1. Read all manuals included
with this product
carefully. Be thoroughly
familiar with the controls
and the proper use of the
equipment.
2. Only persons well acquainted with
these rules of safe operation should
be allowed to use the tool.
Safety
glasses and ear protection
must be worn during
operation.
3. Do not wear loose fitting clothing,
scarves, or neckties in work area.
Loose clothing may become caught
in moving parts and result in serious
personal injury.
!
WARNING
MANUAL
Garantía Limitada
1
DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación: Un año
2.
QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100 Production Drive,
Harrison, Ohio 45030 Teléfono: (800) 543-6400
3.
QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor) del producto
Campbell Hausfeld.
4.
PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier herramienta a motor de Campbell Hausfeld proporcionada o
fabricada por el garante.
5.
COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro del período de
validez de la garantía.
6.
LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:
A.
Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES PARTICULARES, ESTAN
LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto es empleado para uso comercial,
industrial o para alquiler, no se aplicará ninguna garantía. En algunos estados no se permiten limitaciones a la
duración de las garantías implícitas, por lo tanto, en tales casos esta limitación no es aplicable.
B.
CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN DEFECTO,
FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados no se permite la
exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales casos esta limitación o exclusión
no es aplicable
C.
Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones de
funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos accidentes, abusos por
parte del comprador, o falta de operar el producto siguiendo las instrucciones del manual de instrucciones
suministrado también debe incluir la desconexión o modificación de los instrumentos de seguridad. Si dichos
instrumentos de seguridad son desconectados, la garantía quedaría cancelada.
D.
Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.
7.
RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida el Garante, los
productos o componentes que estén defectuosos, se hayan dañado o hayan dejado de funcionar adecuadamente,
durante el período de validez de la garantía
8.
RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:
A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.
B. Entregar o enviar el producto o componente Campbell Hausfeld al Centro de Servicio autorizado Campbell
Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.
C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los) manual(es)
del propietario
Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos. Usted también
puede tener otros derechos que varían de un Estado a otro. o de un país a otro.