Campbell Hausfeld DG490500CK Operating instructions manual - page 2
y los interruptores deben mantenerse
limpios y libres de materiales extraños.
No intente limpiarla introduciendo
objetos con punta a través de las
aberturas. Mantenga los mangos de las
herramientas limpios, secos y libres de
aceite o grasa. Use únicamente un
jabón suave y un paño húmedo para
limpiar la herramienta, evitando todos
los contactos eléctricos.
Ciertos agentes de limpieza y solventes
son nocivos para los plásticos y otras
piezas aisladas. Algunos de éstos
incluyen gasolina, aguarrás, solvente
para laca, solvente de pintura,
solventes de limpieza con cloro,
amoníaco y detergentes de uso
doméstico que contengan amoníaco.
Nunca use solventes inflamables ni
combustibles cerca de las herramientas.
SERVICIO TÉCNICO
Para obtener información con relación
al funcionamiento o reparación
de este producto, sírvase llamar al
1-800-424-8936.
El servicio de la herramienta debe
ser realizado sólo por personal de
reparaciones calificado. El servicio
o mantenimiento realizado por
personas no calificadas puede provocar
riesgo de lesiones.
!
PRECAUCION
Al realizarle un servicio a la
herramienta, utilice únicamente piezas
de repuesto idénticas. Siga las
instrucciones de la sección
Mantenimiento de este manual. El uso
de piezas no autorizadas o el no seguir
las instrucciones de Mantenimiento
puede crear un riesgo de choque
eléctrico o lesión.
19 Sp
DG490500CK, DG490700CK
4. Do not wear jewelry when operating
any tool. Jewelry may become
caught in moving parts and result in
serious personal injury.
5. Always use attachments designed for
use with this tool. Do not use
damaged or worn attachments.
6. Never activate the tool when not
applied to a work object.
Attachments must be securely
attached. Loose attachments can
cause serious injury.
7. Use steady, even pressure when
using tool. Do not force. Too much
pressure can cause the wheel to
crack, break, or overheat.
8. Keep all nuts, bolts and screws tight
and ensure equipment is in safe
working condition.
9. Do not put hands near or under
moving parts.
WORK AREA
Do not
operate a power tool in an
explosive atmosphere, such
as in the presence of
flammable liquids, gases, or
dust. Power tools create sparks which
may ignite the fumes or dust.
Keep work area
clean and well lighted. Cluttered benches
and dark areas invite accidents.
Keep bystanders,
children, and visitors away while
operating a power tool. Distractions
can cause you to lose control.
ELECTRICAL SAFETY
Do not
expose power tools to rain
or wet conditions. Water
entering a power tool will
increase the risk of electric shock.
Do not abuse cord.
•
Never carry tool by its cord.
•
Never pull the cord to disconnect
from receptacle. Pull plug at outlet
rather than pulling the cord.
1. Make sure cord is located so that it will
not be stepped on, tripped over, or
otherwise subjected to damage or
stress.
2. Do not use an extension cord unless
absolutely necessary. Use of
improper extension cord could result
in a risk of fire and electric
shock. If an extension cord must be
used, make sure:
• That the pins on plug of extension
cord are the same number, size and
shape as those of plug.
!
WARNING
!
WARNING
!
CAUTION
!
CAUTION
!
WARNING
• That the extension cord is properly
wired and in good electrical
condition.
• If an extension cord is to be used
outdoors it must be marked with the
suffix “W-A” or “W” following the
cord type designation to indicate it is
acceptable for outdoor use. For
example – SJTW-A.
• See Table titled “Minimum Wire Size
(AWG) of Extension Cord for Bench
Grinder” for proper extension cord
regulations for the bench grinder.
GROUNDING INSTRUCTIONS
In the event of a malfunction or
breakdown, grounding provides a path
of least resistance for electric current to
reduce the risk of electric shock. This
tool is equipped with an electric cord
having an equipment-grounding
conductor and a grounding plug. The
plug must be plugged into a matching
outlet that is properly installed and
grounded in accordance with all local
codes and ordinances.
DO NOT modify the plug provided - if it
will not fit the outlet, have the proper
outlet installed by a qualified
electrician. Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock. This
tool is intended for use on a circuit that
has an outlet that looks like the one
illustrated in Figure 1. The tool has a
grounding plug that looks like the plug
illustrated in Figure 1. DO NOT use an
adapter with this tool.
PERSONAL SAFETY
Do not misuse this
product. Excessive exposure to vibration,
work in awkward positions, and
repetitive work motions can cause injury
to hands and arms. Stop using any tool if
discomfort, numbness, tingling, or pain
occur, and consult a physician.
!
WARNING
1. Stay alert, watch what you are doing,
and use common sense when
operating a power tool. Do not use
tool while tired or under the influence
of drugs, alcohol, or medication. A
moment of inattention while
operating power tools may result in
serious personal injury.
Avoid accidental
starting. Be sure switch is in the locked
or off position before making any
adjustments, changing accessories, or
storing the tool. Carrying tools with
your finger on the switch or with the
switch on invites accidents.
2. Remove adjusting keys or wrenches
before turning on the tool. A key or
wrench attached to a rotating part of
the tool may result in personal injury.
3. Do not overreach. Keep
proper footing and
balance at all times.
Proper footing and
balance enable better
control of the tool in unexpected
situations.
4. Always work in a well-
ventilated area. Wear an
OSHA-approved dust
mask and safety glasses.
5. Keep hands away from rotating parts.
6. Use the tool rest or another practical
way to secure the workpiece.
7. Always use correct size wheels and
made for your grinder. Wheels that
do not match the mounting
hardware will run eccentrically,
causing great risk or injury to the
user and damage to the tool.
TOOL USE AND CARE
Do not use tool if
switch does not turn it on or off. Any tool
that cannot be controlled with the switch
is dangerous and must be repaired.
1. This tool must NOT be modified or
used for any application other than
that for which it was designed.
Do not force the
tool. At all times, let the grinder do the
work, do not force it or apply excessive
pressure to the wheel / cutter. Use the
correct tool for your application. The
correct tool will do the job better and
safer at the rate for which it is designed.
!
CAUTION
!
WARNING
!
CAUTION
2
www.chpower.com
Operating Instructions
TEST
RESET
Figure 1
Para Asistencia Técnica, Llame al Teléfono 1-800-424-8936
Sirvase darnos la siguiente información:
- Número del modelo
- Código impreso
Dirija toda la correspondencia a:
Campbell Hausfeld
Attn: Customer Service
100 Production Drive
Harrison, OH 45030 U.S.A.
Length of Cord in Feet
25 50 100
150
AWG Size of Cord
18 18 18 16
Minimum Wire Size (AWG) of Extension Cord for Bench Grinder
Entretien