D-Link DES-3624 - Switch - Stackable User Manual - Configuration
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management
103
Clicking on one of the ports opens a configuration window for that particular port.
Each page contains the following list of buttons in the panel on the left side: Configuration, Management,
Monitoring,
and Maintenance. These are the main categories for Switch management. Clicking on one of the
categories causes a list of options to appear below.
The switch management features are explained below.
Configuration
This first category includes: IP Address, Switch Module (Switch Module Information and Advanced
Settings
), Port, Trunk Groups, Port Mirroring, Spanning Tree Protocol (STP Switch Settings and STP
Port Settings
), Forwarding and Filtering (Static Forwarding Table, MAC Address Filtering Table, and
Static Multicast Filtering
), IGMP (IGMP Settings and 802.1Q IGMP), and VLANs (802.1Q VLANs and
GMRP
), as well as a number of related windows.
IP Address
Figure 7-1. IP Address window
You can change the IP Address, Subnet Mask, and Default Gateway on the Switch. Click Apply to activate the new
settings.
The information above is described as follows: