D-Link DES-3624 - Switch - Stackable User Manual - page 78
Stackable NWay Ethernet Switch User’s Guide
78
Using the Console Interface
Figure 6-40. 802.1Q Static VLAN Settings screen
The fields you can set are:
♦
VID
Enter a VLAN ID from 1 to 4094 and hit
♦
VLAN Name
Description of the VLAN.
♦
Tag/Untag
Toggle between T for tag and U for untag for each port.
♦
Egress/Forbidden/Non-member (–)
Position the cursor over the dash “–“ representing the appropriate port
number and press
port as a static member of the VLAN. A dash means the port is not given VLAN membership for the VID entered
above.
Choose Browse existing 802.1Q VLANs at the bottom of the 802.1Q Static VLAN Settings screen to access the
following screen: