D-Link DES-3624 - Switch - Stackable User Manual - page 157
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management
157
♦
Use Config File
Determines whether or not the Switch should download its configuration file the next time it
is booted.
♦
Config File Name
The path and configuration name on the TFTP server.
Save Settings To TFTP Server
Figure 7-53. Save Settings To TFTP Server window
To upload a configuration file, enter the Server IP Address where the configuration file is located and the File Name
and file path. Then click the Apply button.
The information is described as follows:
♦
Server IP Address
The IP address of the TFTP server where the configuration file is.
♦
File Name
The path and configuration name on the TFTP server.
♦
Last Upload Status
Shows whether the attempt to upload software was successful or not by displaying
either “Success” or “Failed.”