D-Link DES-3624 - Switch - Stackable User Manual - page 73
Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface
73
Figure 6-34. Port-based VLAN Configuration screen
The fields you can set are:
♦
VLAN ID (VID)
Enter a VLAN ID from 1 to 24 and hit
screen. VID 1 is the default VLAN. All ports are designated members of VID 1 when VLANs are enabled. When a port
is assigned to another VLAN, it is removed from VLAN 1. If it is ever removed from the other VLAN, it will
automatically return to being a member of VLAN 1. Thus, all unassigned ports are automatically members of VLAN 1.
♦
VLAN Name
Description of the VLAN.
♦
Port Assignments
To change port VLAN assignments, you must first enter a VLAN ID number in the VLAN ID
field and press
is not given VLAN membership for the VID entered above. An ‘X’ shows that the port belongs to a different VLAN.
Pressing CLEAR erases all settings for the designated VLAN (VID).
After designating ports as members of the VLAN, press APPLY to let the changes take effect.
Choose Browse Port-based VLANs from the screen above to view the current Port-based VLAN settings.