D-Link DES-3624 - Switch - Stackable User Manual - Monitoring
Stackable NWay Ethernet Switch User’s Guide
144
Web-Based Network Management
Console
Figure 7-41. Configure Console window
This window allows you to choose the refresh rate in the Console Timeout field (2 minutes, 5 minutes, 10 minutes,
15 minutes
or Never). Select the protocol for communicating through the console port, Console or SLIP, in the
Serial Port field. Use SLIP for out-of-band management. If SLIP is being used, you may also set the Baud Rate in the
last field. Click Apply and then reboot the Switch for console port settings to take effect.
The default serial port settings are:
♦
Baud Rate=9600
♦
Data Bits=8
♦
Flow Control=X on/X off
♦
Parity=None
♦
Stop Bits=1
Monitoring
This third main category of the Switch Web-based management program includes: Switch Overview, Port
Utilization
, Port Traffic Statistics, Port Error Packet Statistics, Port Packet Analysis, Browse