D-Link DES-3624 - Switch - Stackable User Manual - page 51
Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface
51
Choose Configure Switch Stack to access the second item on the System Configuration menu. The following
screen appears:
Figure 6-11. Switch Stack Configuration screen
The fields you can set are:
♦
System Name
Corresponds to the SNMP MIB II variable
system.sysName
, and is used to give a name to
the Switch for administrative purposes. The Switch’s fully qualified domain name is often used, provided a name
has been assigned.
♦
System Location
Corresponds to the SNMP MIB II variable
system.sysLocation
, and is used to
indicate the physical location of the Switch for administrative purposes.
♦
System Contact
Corresponds to the SNMP MIB II variable
sysContact
, and is used to give the name and
contact information for the person responsible for administering the Switch.
Information of Individual Switch Unit
This screen allows you to view information for each Switch in your stack, including the Module, Type, and Hardware
Version. Press Information of Individual Switch Unit on the Switch Stack Configuration screen to access the
Information of Individual Switch Unit
screen: