D-Link DES-3624 - Switch - Stackable User Manual - page 141
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management
141
Community Strings and Trap Receivers
Figure 7-38. Community Strings and Trap Receivers window
To use the functions on this window, enter the appropriate SNMP information in the Community Strings and Trap
Receiving Stations sections--you may enter up to four entries in each section. A trap receiving station is a device that
constantly runs a network management application to receive and store traps. Then click Apply to put the settings
into effect.
The SNMP Access Policy Setting information is described as follows:
♦
Community String
A user-defined SNMP community name.
♦
Access Right
The permitted access of Read-Only or Read-Write using the SNMP community name.
♦
Status
Option to set the current community string to Valid or Invalid.
The SNMP Trap Manager Configuration information is described as follows:
♦
Trap Receiving Station
The IP address of the trap receiving station.
♦
Community String
A user-defined SNMP community name.
♦
Status
Option to set the trap receiving station to Enabled or Disabled.