D-Link DES-3624 - Switch - Stackable User Manual - page 145
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management
145
Address Table
, IP Multicast & IGMP Information, Browse GVRP Status, Browse GMRP Status, and
Switch History
.
Switch Overview
Figure 7-42. Switch Statistics window
The information is described as follows:
♦
Update Interval
Choose the desired setting: 5 seconds, 15 seconds, 30 seconds, 60 seconds or Suspend.
♦
Port
The selected port to be monitored.
♦
TX frames/sec
Counts the total number of frames transmitted from a selected port per second since the
Switch was last rebooted.
♦
RX frames/sec
Counts all valid frames received on the port per second since the Switch was last rebooted.
♦
% of Utilization
This shows the percentage of available bandwidth each port is using over the amount of time
specified by the update interval. For example, when a 100 Mbps port is relaying packets at 50 Mbps, the
utilization is 50%.