D-Link DFE-2600 Series User Manual - Changing Your Password
Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management
44
also D-Link. You will need to use this user
name and password when you first set up
your hub or if you use the Factory Reset
NVRAM to Default Value menu selection.
Change this user name and password to
protect the security of your hub.
There are two levels of user privilege: Super User and General User. The
default user (D-Link) has Super User privileges. Some functions available
to Super Users are not available to General Users. The main menu below
is the menu for Super Users:
DFE-2600 Stackable Hub - Main Menu
System Configuration
TCP/IP Parameters Configuration
Network Monitoring
Out-of-Band/Console Configuration
User Account Change
SNMP Trap Manager Configuration
SNMP Manager Configuration
System Reset
Software Update
Factory Reset NV-RAM to Default Value
LOGOFF
Changing Your Password
To change your user password, follow these steps:
1.
Choose User Account Change from the main menu.
2.
Select Change Password. The following screen will be displayed: