D-Link DFE-2600 Series User Manual - page 76
Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management
64
hub’s internal clock. A high count in this field may indicate a hard-
ware problem in the hub or in an Ethernet interface.
♦
SA Changes. This statistic counts the number of times the source
address has changed.
♦
Isolates (only for 100Mbps connections). Counts the number of
times a port auto isolates.
♦
SymbolError (only for 100Mbps connections). Counts the number
of times a received packet contained symbol errors. Only one sym-
bol error is counted per packet regardless of the number of symbol
errors within the packet.
♦
Total Errors. This statistic is the sum of the FCS Error, Alignment
Error, Too Long Frame, Short Event, Late Event, Very Long Event,
and Data Rate Mismatch counters.
♦
Readable Octs. This statistic counts the total number of bytes (oc-
tets) included in valid (readable) frames.
DFE-2600 Stackable Hub - Network Monitoring : Port Statistics
Current Group ID: 1
Current Port ID: 9
Pkts
Pkts/Sec
Pkts
Pkts/Sec
Frames Too Long:
0
0
Readable Frames: 484447
0
Very Long Events:
0
0
Multicast:
7393
0
Short Events:
0
0
Broadcast:
305460
0
Late Events:
0
0
Auto Partition:
0
0
Runt Frames:
2632
0
DRM:
0
0
Collision:
8514
0
SA Changes
319965
0
FCS Errors:
395
0
Isolates:
0
0
Alignment Errors:
9
0
SymbolError:
0
0
Errs
Errs/Sec
Octs
Octs/Sec
Total Errors:
404
0
Readable Octs:
105350920
0
Next Monitoring Group ID [1]
Next Monitoring Port
ID [9 ]
PREV GROUP
NEXT GROUP
PREV PORT
NEXT PORT
CLEAR COUNTER
EXIT