D-Link DFE-2600 Series User Manual - page 63
Master Hub Setup and Management
51
and System Contact. These settings can be retrieved from the hub using
SNMP requests, allowing them to be used for network management pur-
poses. Each of these fields is restricted to 64 characters:
♦
System Name. This parameter corresponds to the MIB-II object
sysName, and is used to assign a name to the hub for administrative
purposes. The hub’s domain name is often used, provided a name
has been assigned.
♦
System Location. This parameter corresponds to the MIB-II object
sysLocation, and is used to indicate the physical location of the hub
for administrative purposes.
♦
System Contact. This parameter corresponds to the MIB-II object
sysContact, and is used to note the name and contact information of
the person responsible for administering the hub.
♦
Display Timeout. An additional setting, the console time-out, may be
used to automatically log out the console interface after a predetermined
period of inactivity. This feature increases hub security by preventing
access to the hub after the interface has been inadvertently left logged
on. A setting of 0 disables this feature.
DFE-2600 Stackable Hub - System Configuration Menu
Mgmt Hardware Revision:
Rev. 01
Boot PROM Firmware Version: Ver. 2.22
Software Version:
Ver. 2.04
MAC Address:
0080C80D308C
System Description:
D-Link Corp. DFE-2600 Dual Speed Stackable Hub SNMP/
System Name
[
]
System Location
[
]
System Contact
[
]
Console/Telnet Display Timeout in Minutes
[60
]
HELP
SAVE
EXIT