D-Link DFE-2600 Series User Manual - Snmp Traps
Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management
52
SNMP Traps
The hub sends out SNMP traps to network management stations whenever
certain exceptional events occur, such as when the hub is powered on or
when an SNMP request is made using an unknown community name. An
SNMP trap sent to another network management site provides a warning
about, for example, an attempted unauthorized access to the network or
hub, or changes to a network hub’s configuration that may effect other parts
of the network. Traps are sent only to selected network management hosts.
The hub allows up to four different hosts to receive traps from the system.
DFE-2600 Stackable Hub - SNMP Trap Manager Setting Menu
IP Address
SNMP Community String
Status
[
] [
]
[
] [
]
[
] [
]
[
] [
]
HELP
SAVE
EXIT
The following trap parameters can be set:
♦
IP Address. This parameter specifies the IP address of the network
management station which will receive traps from the hub.
♦
SNMP Community String. This parameter specifies the SNMP
community name to be included in the trap request.