D-Link DFE-2600 Series User Manual - Note:
Master Hub Setup and Management
65
You can use PREV GROUP, NEXT GROUP, PREV PORT, and NEXT
PORT to switch hubs or ports. CLEAR COUNTER resets all counters
back to zero.
NOTE:
The CLEAR COUNTER action only resets the
counters for the statistics display; the under-
lying counters (i.e., MIB variables) are not
cleared.
Displaying Segment Statistics
The hub stack collects network transmission statistics for each segment in
the stack. You can choose to view them from the Statistics menu, accessi-
ble under the Network Monitoring menu.
♦
StatsPkts. This statistic displays the number of packets received
from the network, including error packets.
♦
BroadcastPkts. This statistics counts the number of good broadcast
packets received on the segment.
♦
MulticastPkts. This statistics counts the number of good multicast
packets received on the segment.
♦
CRCAlignErrors. This statistic counts the number of valid length
packets (64 to 1518 bytes) that had a bad Frame Check Sequence
(FCS).
♦
UndersizePkts. This statistic counts the number of well-formed
packets that were smaller than 64 octets.
♦
OversizePkts. This statistic counts the number of well-formed
packets that were longer than 1518 octets.