D-Link xStack DES-3800 Series User Manual - Authentic Radius Server
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Authentic RADIUS Server
The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection against
a sniffing, active hacker. The Web Manager offers three windows.
Click Security > 802.1x > Authentic RADIUS Server to open the Authentic RADIUS Server window shown below:
Figure 11- 17. Authentic RADIUS Server window
This window displays the following information:
Parameter Description
Succession
Choose the desired RADIUS server to configure: First, Second or Third.
RADIUS Server
Set the RADIUS server IP.
Authentic Port
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port
Set the RADIUS account server(s) UDP port. The default port is 1813.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Status
This allows you to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
215