D-Link xStack DES-3800 Series User Manual - Gvrp Setting
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Parameter Description
VID (VLAN ID)
Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing
VLAN in the Modify window. VLANs can be identified by either the VID or the VLAN name.
VLAN Name
Allows the entry of a name for the new VLAN in the Add window, or for editing the VLAN
name in the Modify window.
Advertisement
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Port Settings
Allows an individual port to be specified as member of a VLAN.
Tag
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will desig-
nate the port as Tagged.
None
Allows an individual port to be specified as a non-VLAN member.
Egress
Select this to specify the port as a static member of the VLAN. Egress member ports are ports
that will be transmitting traffic for the VLAN. These ports can be either tagged or untagged.
Forbidden
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
Click Apply to implement changes made.
GVRP Setting
In the L2 Features menu, open the VLAN folder and
click GVRP Settings.The GVRP Settings window,
shown left, allows you to determine whether the Switch
will share its VLAN configuration information with other
GARP VLAN Registration Protocol (GVRP) enabled
switches. In addition, Ingress Checking can be used to
limit traffic by filtering incoming packets whose PVID
does not match the PVID of the port. Results can be seen
in the table under the configuration settings, as seen
below.
Figure 7- 9. GVRP Settings window
81