Eaglemaster E4 User Manual - - Comfort /window Close :
Control Channel (-) features:
- Comfort /window close :
If programmed with the feature, this channel will constant output for 30sec. When arming the system.
- 2nd stage door unlock:
If programmed with the feature , to operate it by press button at 2nd time , 2nd stage door unlock
will be output for passenger side .
- Remote latched:
If programmed with the feature, to operate it when ignition off, press button for over 2sec.,
siren will give 1 chirp and the Channel will constant output.
To exit by ignition off and press button over 2 seconds, siren will give 2 chirp and
the channel will stop output.
- Dome Light:
If programmed with the feature , the channel will constant output 30sec. when disarming . Turn
ignition switch ON will stop the channel output.
- Pager :
If programmed with the feature, this channel will output when system trigger .
-Arm W/Engine running:
If programmed with the "Arm W/Engine running, this feature for the car to keep engine running after
arriving at your destination.
To operate this feature by pressing for 2sec. while driving or ignition ON , the siren will give one
chirp and the LED will start flashing Green color, at the time the system is in standby mode, the
owner must follow under process to activate the "Arm W/Engine running " mode.
(1) Within 15sec. Turn Ignition OFF (engine still keep running), open and close door to leave the car.
Note: If within this 15sec. press any button once will exit the mode, LED off.
(2) While leaving the car by open and close the door, within 5sec. press button once, the system
will arm and door lock immediately, the parking lights will keep flashing, and the status LED will
flashing Green color, however the engine will still keep running. The 2-Way remote will respond
under icons flashing as long as turbo time finished.
Exit mode :
Pressing button once of the remote control within engine running mode , the system
will exit turbo mode and turn back in armed position.
NOTE:
1. In engine running mode, the sensor zone trigger will be bypassed until the programme
time finished.
2. In engine running mode, if door, hood or trunk has been triggered, engine will stop
running and alarming the system, simply press button to disarm the system.
(1) After leaving the car, within 5sec.
If press wrong button will exit mode.
(2) After leaving the car, within 5sec.
If without press button will exit
mode automatically.
Flashing
Note:
2-way LCD display :