Eaglemaster E4 User Manual - - Turbo Mode:

- Turbo mode: 

If programmed with the feature , this channel will constant output when ignition turn on for over 

1 minutes. It will keeps the engine running after arriving at your destination by ignition off for a 

programmable of 1, 3, 5, or 10 minutes. This allows the system's timer to conveniently cool down 

the turbo after you have left the vehicle. 

Note: in turbo mode time , if arming the system, sensors will be bypassed and LED flashing 

           Green color for a programmed turbo time.  

Important: Turbo mode should be used only in open areas. Never start and run the vehicle 

                     in an enclosed space such as a garage or carport.

2-way LCD display : 

NOTE: 

you may disable this turbo mode 

after ignition turn off ,by press 

button         once, the CH-5 will 

stop outputting.

- CH-5 (-) programme time output: 

This channel-5 is a negative (-500mA) output features, this channel can be programmed 

(1)- Arming output from 1~120sec.   

(2)- Press button                , output from 1~120sec. 

(1)- Arming output 1~120sec. if programmed, this channel will activate when arming, the 

       output  timing can be programmed from 1 to 120seconds.

(2)- Press button                output 1~120sec. If programmed, to operate this channel by press 

       button                for over 2sec. This channel will constant output for programme time.

Exit: When this channel is outputting, if press button                once, it will stop outputting.

NOTE: This channel can be programmed pulse delay time (1~120sec.), If programmed,

             channel-5 will delay output with programme pulse delay time.

Flashing