EarthWalk eBuddy Series 3 User Manual - page 32
Integrated wireless card
2/4/00
-23-
eBuddy User Manual
To configure the Integrated wireless card:
1. Click
Start
, point to
Settings
, then click
Control Panel
.
2. Double-click
Network
.
3. Click
LANEscape/WL2432 PCMCIA Adapter
to select it, then click
Properties
(see Figure 2-2).
4. Click the
Advanced
tab to display the configuration properties, as shown
in Figure 2-3.
5. Click each property and set the corresponding value as follows:
a. Click
Default Channel
and set the Value to correspond to the chan-
nel in use by the SmartCart’s (or other device’s) access point.
b. Click
ESSID
and enter a Value corresponding to the SmartCart’s
access point.
c. Click
Network Type
and choose a value corresponding to the Smart-
Cart’s access point (normally, this value will be “Infrastructure”).
d. Click
RTS Threshold
and choose a value or 2,300.
6. Click
OK
to close the dialog box, then click
OK
to close the Network dia-
log box. Close the Control Panel.
Figure 2-2. Configuring the Integrated wireless card
ebud.book Page 23 Friday, February 4, 2000 11:11 AM