EarthWalk eBuddy Series 3 User Manual - Integrated Peripherals
Integrated peripherals
2/4/00
-77-
eBuddy User Manual
Integrated peripherals
The integrated peripherals panel is shown in Figure 5-7.
IDE HDD Block Mode
This item allows you to set your hard disk controller to use the fast block mode
to transfer data to and from your HDD. The options for this setting are Enabled
(IDE controller uses block mode) or Disabled (IDE controller uses standard
mode).
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE hard disk drive controllers can support up to two separate hard disk drives.
These drives have a master/slave relationship determined by the cabling con-
figuration attaching them to the controller. Your system supports two IDE con-
trollers — a primary and a secondary controller — so you can install up to four
separate hard disk drives.
PIO means Programmed Input/Output. Rather than have the BIOS issue a
series of commands to transfer data to or from the disk drive, PIO allows the
BIOS to tell the controller what it wants and then let the controller and the CPU
Figure 5-7. Integrated peripherals panel
ebud.book Page 77 Friday, February 4, 2000 11:11 AM