EarthWalk eBuddy Series 3 User Manual - page 46
Manual is about: Student Laptop
of
99
Using the external CD-ROM drive
2/4/00
-37-
eBuddy User Manual
Disconnecting the external CD-ROM drive
To disconnect the external CD-ROM drive (refer to Figure 2-18):
1. Turn the eBuddy’s power off.
2. Remove the connector from the eBuddy by pressing the clips on the side of
the connector simultaneously, as shown in (1).
3. Holding the clips in, pull the connector gently out of the port, as shown in
(2).
4. Similarly, remove the connector from the CD-ROM drive by pressing the
clips on the side of the connector simultaneously, as shown in (3), and pull
the connector gently out of the port, as shown in (4).
Figure 2-16. Opening the CD-ROM tray
Figure 2-17. Hole for manually removing a CD-ROM
ebud.book Page 37 Friday, February 4, 2000 11:11 AM