EarthWalk eBuddy Series 3 User Manual - page 44
Manual is about: Student Laptop
of
99
Using the external CD-ROM drive
2/4/00
-35-
eBuddy User Manual
Using the external CD-ROM drive
An external CD-ROM drive is available from EarthWalk. You should only use
this CD-ROM drive, which has been specifically designed to operate with your
eBuddy.
Connecting the external CD-ROM drive
To install your external CD-ROM drive:
1. Turn the eBuddy’s power off.
2. Place the CD-ROM drive on a table or other flat surface.
3. Open the cover of the CD-ROM port.
4. Locate the CD-ROM cable and connect the cable to the CD-ROM drive.
5. Connect the cable to the CD-ROM port on the eBuddy.
6. Turn on the eBuddy.
The CD-ROM drive should now function normally.
Figure 2-14. Connecting the CD-ROM drive to the eBuddy
ebud.book Page 35 Friday, February 4, 2000 11:11 AM