EarthWalk eBuddy Series 3 User Manual - page 81
Chapter 5: BIOS setup
eBuddy User Manual
-72-
2/4/00
HDD Power Down
This setting will determine how many minutes elapse from the last keyboard or
mouse input until the HDD powers down. You can set the delay from 1 to 15
minutes, or disable HDD Power Down altogether.
MODEM Use IRQ
You can only change the value of this setting when Power Management is set
to User Define. Options for this setting are NA, 3, 4, 5, 7, 9, 10, or 11.
Doze Mode
When enabled, the CPU clock will run at a slower speed to conserve power,
following a delay of the specified number of seconds when no input activity
has occurred. All other devices will run at normal speed. The options for this
setting are 8, 12, 16, 20, 24, or 28 seconds. The setting can also be Disabled.
Standby Mode
When enabled, the hard disk drive and video will be turned off to conserve
power, following a delay of one minute to 1 hour (per your selection) when no
input activity has occurred. All other devices will run at normal speed. The set-
ting can also be Disabled.
Suspend Mode
When enabled, the entire system will be turned off to conserve power, follow-
ing a delay of one minute to 1 hour (per your selection) when no input activity
has occurred. The setting can also be Disabled.
Suspend Mode Option
The options are Auto, STD, and STR. STD invokes Suspend to Disk mode;
STR invokes Suspend to RAM mode. When you close the eBuddy’s LCD
screen, the system is automatically placed in STD mode.
Resume by Alarm
Use this setting to wake the system upon alarm. The options for this setting are
Enabled and Disabled.
ebud.book Page 72 Friday, February 4, 2000 11:11 AM