EarthWalk eBuddy Series 3 User Manual - page 78
Chipset features setup
2/4/00
-69-
eBuddy User Manual
DRAM Page Idle Timer
The options are 2, 4, 6, or 8 Clks.
DRAM enhanced Paging
The options for this setting are Enabled and Disabled.
Fast MA to RAS# Delay
The options for this setting are 1 Clks or 2 Clcks.
SDRAM (Cas Lat/RAS-to-CAS)
Do not change the default value of this setting unless you install SDRAM that
requires changes. The options are 2/2 or 3/3. Contact EarthWalk technical sup-
port for more information.
SDRAM Speculative Read
If you set Enable, the CPU will save the data in DRAM in speculative mode. If
an error occurs, the CPU will cancel the function, as some operating systems
do not support this function. The options are Enable or Disable, and the default
is Disable.
System (Video) BIOS Cacheable
This setting determines whether the area of RAM used by the system (Video)
BIOS can be cached.
8 bit I/O Recovery Time
The timing of the 8-bit ISA card. This item determines the programmable
recovery time into back-to-back I/O cycles.
16 Bit I/O Recovery Time
The timing of the a6-bit ISA card.
ebud.book Page 69 Friday, February 4, 2000 11:11 AM