EDAN H100B User Manual - Battery Installation
of
99
H100B Pulse Oximeter User Manual
- 24 -
1
RSGND
The RS232 GND
2
LED+
LED drive signal, IR Anode
3
LED-
LED drive signal, Red
Anode
4
RXD
H100 RS232 RX
5
Detector Anode
Detector anode
6 Connection Detector
connection
7 AGND
Analog
GND
8
TXD
H100 RS232 TX
9
Detector Cathode Detector cathode
2.4 Powered by Battery
The oximeter can be powered by four 1.5V LR6 AA
alkaline batteries. It will operate for 48 hours when used
for general operation, or about 24 hours of operation
with the backlight and alarm on.
The oximeter can also be powered by the Ni-MH
rechargeable battery package.
Battery Installation
To install the alkaline batteries:
1. Make sure the oximeter is turned off.
2. Press the battery compartment latch and