EDAN H100B User Manual - Alarm Indicators
of
99
H100B Pulse Oximeter User Manual
- 54 -
Unconnected
SpO
2
Sensor off
Low Battery
Alarm Indicators
When an alarm occurs, the oximeter will indicate it
through the following indications:
■ Character flash
■ Alarm tone
High level alarms: character flashes quickly and sounds
triple + double + triple +double beep;
Medium level alarms: character flashes slowly and
sounds triple beep;
The sound pressure range for auditory alarm signal is
from 45dB to 85dB.
4.2 Alarm Conditions
4.2.1 Alarm off Before the First Measurement
Before the first measurement, the alarm system is
configured to be off. At this time, if the SpO
2
sensor is
unconnected or the sensor is off, the oximeter will not
give an alarm.