EDAN H100B User Manual - 6 Maintenance

H100B Pulse Oximeter User Manual 

- 63 - 

6 Maintenance

WARNING 

Before cleaning the oximeter or the sensor, make 

sure that the oximeter is switched off. 

The oximeter does not require calibration. 

If service is necessary, contact qualified service 

personnel or your local EDAN representative. 

Before using the oximeter, do the following: 

■ 

Check if there is any mechanical damage; 

■ 

Check if all the outer cables, inserted modules and 

accessories are in good condition; 

■ 

Check all the functions of the oximeter to make 

sure that the oximeter is in good condition. 

If you find any damage on the oximeter, stop using the 

oximeter on patient, and contact the biomedical engineer 

of the hospital or Customer service immediately. 

Periodic Safety Checks 

It is recommended that the following checks should be 

performed every 24 months: