EDAN H100B User Manual - page 51
H100B Pulse Oximeter User Manual
- 43 -
a specific time. You can set the Sensitivity to Hi or Low
via the menu. The higher the sensitivity is, the quicker
the pulse oximeter responds to the changes in the
patient’s oxygen saturation level. Contrarily, the lower
the sensitivity is, the slower the pulse oximeter responds
to the changes in the patient’s oxygen saturation level,
but the measurement accuracy will be improved. When a
critical patient is monitored, selecting high sensitivity
will help to understand the patient’s state.
3.3.9 Alarm System
Set Alarm System to ON or OFF to turn on or off the
alarm system.
If Alarm system is set to OFF, a dialog box pops up as
follows:
Figure 3-14 Confirm to Turn off Alarm
If Alarm System is ON and an alarm occurs, the
oximeter will give a visual alarm and an audio alarm.
Pressing the Alarm Silence button can pause the alarm