EDAN H100B User Manual - page 64
H100B Pulse Oximeter User Manual
- 56 -
gives a medium alarm. (Make sure the alarm system in
menu is ON.)
4.2.5 Higher than Hi Alarm Limit
If the measured SpO
2
or PR value is higher than the Hi
Alarm (upper alarm limit), the oximeter gives a high
alarm.
Here we take PR for example:
If the measured PR value is higher than the setup PR Hi
Alarm, the oximeter gives a high alarm (Make sure
alarm system in menu is ON). A ↑ icon displays near PR,
which indicates that the measured value is higher than
that of PR Hi Alarm, it will synchronously flash with
PR value.
4.2.6 Lower than Lo Alarm Limit
If the measured SpO
2
or PR value is lower than the Lo
Alarm (lower alarm limit), the oximeter gives a high
alarm.
Here we take SpO
2
for example:
If the measured SpO
2
value is lower than the set SpO
2
Lo Alarm, the oximeter gives a low SpO
2
alarm. (Make
sure the Alarm System in menu is ON.)
A ↓ icon displays near SpO
2
value, which indicates the