EDAN H100B User Manual - page 47
of
99
H100B Pulse Oximeter User Manual
- 39 -
Large numeric mode
Then confirm the selection by pressing the Function
button.
3.3.2 Patient Type
Patient Type can be set to different measurement modes:
Adu for Adult or Pediatric patient or Neo for Neonatal
patient.
Set Patient Type to Adu or Neo, and confirm it by
pressing the Function button.
Note:
When patient type is changed to Neo, please use
the Neonate SpO
2
Sensor for accurate
measurement.
3.3.3 Alarm Volume
The Alarm Volume button is used to adjust alarm
volume and its range is from one to five.
When Alarm System is setup to ON, if a low alarm, a
medium alarm or a high alarm occurs, the oximeter
sounds beep.
3.3.4 Pulse Volume
The user can turn on or off the pulse volumebypressing