F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 6.62 - Administrator's Manual - page 68
68
Step 1.
Create the security certificate
1.
Browse to the F-Secure Anti-Virus for Microsoft Exchange Web
Console installation directory, for example:
C:\Program Files\F-Secure\Web User Interface\bin\
2.
Locate the certificate creation utility, makecert.bat, and double click it
to run the utility.
3.
The utility creates a certificate that will be issued to all local IP
addresses, and restarts the F-Secure Anti-Virus for Microsoft
Exchange Web Console service to take the certificate into use. Wait
until the utility completes, and the window closes. Now you can
proceed to logging in.
Step 2.
Log in and install the security certificate
1.
Select Programs>F-Secure Anti-Virus for Microsoft
Exchange>F-Secure Anti-Virus for Microsoft Exchange Web Console,
or enter the address of the F-Secure Anti-Virus for Microsoft
Exchange and the port number in your web browser. Note, that the
protocol used is https. For example:
https://127.0.0.1:25023
2.
The Security Alert about the F-Secure Anti-Virus for Microsoft
Exchange Web Console certificate is displayed. If you install the
certificate now, you will not see the Security Alert window again. Click
View Certificate
to view the certificate information and to install the
certificate.
3.
The Certificate window opens. Click
Install Certificate
to proceed to
the Certificate Import Wizard.
4.
Follow the instructions in the Certificate Import Wizard. When the
wizard has completed, you are prompted to add the new certificate in
the Certificate Root Store. Click
Yes
.
5.
If the Security Alert window is still displayed, click
Yes
to proceed.
6.
When the login page opens, enter the user name and the password.
Note, that you must have administrator rights to the host. Then click
Log In
.