Faroudja Native Rate Series Installation And Operation Manual - page 2
Menu Tree Summary
How to Access
Available Functions
DVD Default Transport Settings
Audio DRC:
Dolby Digital and DTS:
96KHz out:
MPEG out:
Virtual Surround:
TV Screen:
Background:
Setup Menu:
User Menu
Press the Up/Down buttons
Advanced Color System
Noise Reduction
Detail
Tint
Color
Contrast
Brightness
Off
On
96KHz
MPEG
Off
16:9
DVD Logo
Basic
System Menu
Press Setup then Enter
Screen Shape
Output Select
Save to All
Operating Mode
IR Receiver
RS232 Echo
DCDi Mode
Film Mode
LCD Timer
Red LED
Green LED
OSD V Pos.
OSD Timer
HDTV EXT Input
HDTV Comp Pass-Thru
Bottom Blank
Right Blank
Left Blank
Top Blank
Blanking Gray Level
V-Sync Polarity
H- Sync Polarity
Blue Y/C Delay
Red Y/C Delay
Green Y/C Delay
V- Position
H- Position
RGB Input Sync
Sync on Y
Composite sync on H
Sync on green
Output Format
Input Format
DVD Black Level
QUICK START OPERATION MENU
SETUP MINIMUM TO-DO LIST:
• When unit is first plugged in to Power it will go
through an initialization process. Do not send
any commands to the unit during this time.
Once initialized, the unit is instant On/Off
• Set the proper screen shape in the Setup Menu
(default is 4:3)
• Set the proper output type (default is RGBHV)
• Optimize the display device for image position,
size, Contrast, Brightness and gray scale. Use
a test pattern DVD or internal generator.
• The internal DVD player has already been setup and
optimized for the processor. Do not change any of the
audio or video setup options in the DVD setup menu.
REMOTES
Use eight button remote for controlling
processor functions
Use larger remote to control the DVD transport features.
TO PLAY A DVD
• Press Open/Close on the front panel or on
the larger remote and load the DVD
• Press Open/Close again – DVD will auto-start
to the DVD Menu
• Press Enter or Play on the DVD remote or on
the front panel. This will also switch the Input to
DVD and start the movie.
TO ACCESS DVD MENU
Use the larger remote to access the menu and
navigate through the options.
TO CHANGE ASPECT RATIOS
• Use the processor remote and press Menu
• Use the Function Keys to Select Aspect Ratio
• Use the Value keys to change Aspect Ratio
TO ADJUST PICTURE QUALITY
• Use the processor remote
• Press the Function keys to Select the Picture menu
• Use the Function keys to Select,
use the Value keys to adjust.
STORING A PRESET
• Select the Input menu
• Use the Function keys to select Store
• Use the Value keys to select a preset.
• Press Enter to store.
i