Faroudja Native Rate Series Installation And Operation Manual - Setting The Digital Audio
20
DVD
Setting the Digital Audio
Output To Be Compatible with
Your AV Component
– DVD
This player is capable of digital audio output for Dolby
Digital, DTS, MPEG, and signals with a sampling rate of
96 kHz. Make settings in the Setup screen Audio 1
menu to reflect the capabilities of the components that
you have made digital connections to.
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been
set by the player.
• If you have made only stereo line connections (analog)
using the supplied audio cord, it is not necessary to make
any changes in this menu.
Dolby Digital Out
This player is capable of outputting the Dolby Digital
surround sound audio signal. When the player is
connected to an AV component that has a built-in Dolby
Digital decoder, select [Dolby Digital]. This player can
also convert the Dolby Digital signal to a digital Linear
PCM signal, the same digital signal output from a CD.
Select [Dolby Digital
3 PCM] when you have made
connections to an amplifier or receiver with a Dolby Pro
Logic decoder or a Digital Analog Converter (DAC).
Settings: Dolby Digital*
Dolby Digital
3 PCM
*Factory setting
Adjusting the Dynamic Range
of the Audio Soundtrack
– DVD
Audio DRC stands for Audio Dynamic Range
Compression. When Audio DRC is on, soft sounds such
as dialog can be heard more clearly without making loud
sounds even louder. When Audio DRC is set to [Off],
there is no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup
screen Audio 1 menu.
Settings: Off*
On
*Factory setting
Notes
• Audio DRC is only effective with Dolby Digital audio
sources.
• If you have set the player to convert Dolby Digital audio to
PCM, also make sure that you set the [Digital Out] to
[On] to hear the Audio DRC effect.
• The effect of Audio DRC depends on your speakers and
AV amplifier settings.
—
—
— 96kHz
3 48kHz
— MPEG
3 PCM
V2
Video1
General
A2
Language
Exit
Move
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
Off
On
Off
Dynamic playback at low volume
SETUP
—
—
—
—
V2
Video1
General
A2
Language
Exit
Move
Audio DRC
Dolby
Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
Off
Dolby Digital
Dolby Digital
3 PCM
96kHz
3 48kHz
MPEG
3 PCM
Change Dolby Digital output mode
SETUP
NOTICE:
THE DIGITAL AUDIO SETTINGS
HAVE BEEN OPTIMIZED BY
FAROUDJA FOR THE NRS-DCS.
DO NOT CHANGE
THESE SETTINGS.