Faroudja Native Rate Series Installation And Operation Manual - Changing to The Setup Screen
19
DVD
3
Use the cursor buttons (
F/E) to select the
menu you want.
As each menu is selected with the cursor, the
settings appear below the menu heading.
4
Use the cursor buttons (
K ) to enter the menu.
The top item within the menu becomes highlighted.
5
Use the cursor buttons (
G/H) to select the
setting you want to change.
The options available for each setting appear to the
right when the setting is selected. The current
setting appears with the setting indicator lit.
6
Use the cursor buttons (
E) to enter the
setting options.
• Not all menu options can be changed while a disc
is playing. In these cases, the options appear
grayed out on the screen and cannot be adjusted.
To change these settings, press STOP
K first
before pressing SETUP.
• Operating the menu after pressing STOP
K may
cancel the resume function.
• Some menu options are not immediately
effective if set while a disc is playing. To make
these settings effective, stop playback and then
start again, or change the settings while the disc
is stopped.
Example
—
—
—
SETUP
ENTER
V2
Video1
General
A2
Language
Exit
Move
Select
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
Off
Dolby Digital
Dolby Digital
3PCM
96kHz
3 48kHz
MPEG
3 PCM
Change Dolby Digital output mode
Example
—
—
—
V2
Video1
General
A2
Language
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio1
Off
Dolby Digital
Dolby Digital
3PCM
96kHz
3 48kHz
MPEG
3 PCM
Output Dolby Digital
SETUP
ENTER
Exit
Move
Select
7
Use the cursor buttons (
G/H) to select a
new setting and press ENTER to set the
new setting in memory. Press RETURN or
the cursor button (
F) to exit the options
without making any changes.
7
7, 8
7, 8
9
8
Press RETURN or the cursor button (
F) to
go back to the main menu bar to select
another menu.
9
Press SETUP to close the Setup screen.
The Setup screen closes.
Note
The next time you press SETUP, you’ll see the menu screen
that you exited from last time.
How to interpret the setting indicator colors in
the Setup screen menus
When setting up the system, or when making
adjustments, it is convenient to know what settings are
applicable to the different disc formats. When the
settings appear for each menu option, the currently
selected setting appears with the setting indicator
highlighted in one of three colors: blue, green or yellow.
These colors correspond to what formats the menu
option effects as shown in the table below.
Notes
• If a setting applicable only to DVDs is changed while a
Super VCD/Video CD or CD is loaded, a blue DVD icon
appears in the upper right hand corner of the screen to
indicate that the setting is not applicable to the currently
loaded disc. The setting will be effective the next time a
DVD is loaded.
• The blue indicator is shown for the [TV Screen], but the
aspect can be switched for Super VCD.
Color of indicator
Disc format(s)
Blue
DVD only
All compatible formats
DVD/Super VCD/Video CD
Green
Yellow
Changing to the Setup Screen
“Expert” Menu Mode
The Setup screen menus are divided into two levels,
[Basic] and [Expert], to make this unit more convenient
to operate for different levels of users. The [Basic]
menu mode contains functions that may be considered
necessary for the basic operations of this player and
helpful on-screen information identified by the i mark.
The [Expert] menu mode adds to the [Basic] menu
mode additional functions of the player that can be
adjusted to further personalize performance of the
player.
In this manual, functions that are contained in the
[Expert] menu mode are identified by the Expert icon.
Make changes to the [Setup Menu Mode] setting in the
Setup screen General menu.
IMPORTANT
Settings: Expert
Basic*
*Factory setting
Note
On-screen information only appears in the [Basic] menu mode.
—
—
General
A2
V2 Language
Audio1
Video1
Setup Menu Mode
Setup Navigator
Parental Lock
Expert
Basic
Off (us)
Change menu mode
SETUP
ENTER
Exit
Move
Select